Fresh Install Corsair AI Workstation 300

[deerin]

I wanna install Proxmox VE on my Corsair AI W300. Running into a few problems. First I'll see "/boot/ not found" when booting into the USB I made. It'll still however show the Proxmox Installer GUI. When i try to run the GUI installer I get two errors:

modprobe: ERROR: could not insert 'andxdna': Unknown symbol in module, or unknow searching for block device containing the ISO proxmox-ve-9.1-1

However it will attempt again and find the ISO, I’m thinking this is cause the tool I used created multiple partitions on the USB. I’ll see:

testing device '/dev/sda' for ISO
found Proxmox VE ISO

Installation will still fail tho as I get the error:

Failed to get interface, index: No such device.

I’m thinking proxmox installer isn’t recognizing my NIC Card nor a direct Ethernet connection? As pinging to 1.1.1.1 fails

Any help I'd appreciate!

 

[cheiss]

Hi,

first off, how did you create the USB installation medium? We have a dedicated guide for this: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#installation_prepare_media

Failed to get interface, index: No such device.

when exactly do you get this error? At least it's not an error from our tooling, AFAICS.
Can you provide screenshot/photo of the entire installation log until it fails?

You can also try booting into debug mode (under Advanced Options in the GRUB menu) and provide the output of lsblk -S and ip link, which may help.

 

[deerin]

Hi,

first off, how did you create the USB installation medium? We have a dedicated guide for this: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#installation_prepare_media


when exactly do you get this error? At least it's not an error from our tooling, AFAICS.
Can you provide screenshot/photo of the entire installation log until it fails?

You can also try booting into debug mode (under Advanced Options in the GRUB menu) and provide the output of lsblk -S and ip link, which may help.

first off, how did you create the USB installation medium? We have a dedicated guide for this: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#installation_prepare_media

Using an 8GB USB:

- First attempt was with Rufus 4.11, similar to the issue I'm encountering now when I select graphical installation it will fail, haven't tried terminal.

- Second attempt I reformat the USB, this time I used Etcher (balenaEtcher) and it will also fail when attempting to run the graphical installer.

Can you provide screenshot/photo of the entire installation log until it fails?

You can also try booting into debug mode (under Advanced Options in the GRUB menu) and provide the output of lsblk -S and ip link, which may help.

Welcome to the Proxmox VE 9.1 (ISO 1) Installer!
Initial setup startup
mounting proc filesystem
mounting sys filesystem
EFI bootmode detected, mounting efivars filesystem
boot comandline: Boot_Image=/boot/linux26 ro ramdisk_size=1677216 w quiest spla
loading drivers: nvme umi mac_hid amd_pmc video xhci_pci thunderbolt ccp sdhci_
i_pstore input_leds serio_raw psmouse pcspkr rapl aesni_intel ghash_clumulni_inte
tl
modprobe: ERROR: could not insert 'amdxdna': Unknown symbol in module, or unknow
searching for block device containing the ISO proxmox-ve-9.1-1
with ISO ID '019a985d-b08c-79ba-b2d7-265f242d2cf0'
testing again in 1 seconds
testing again in 2 seconds
testing device '/dev/sda' for ISO
found Proxmox VE ISO
preparing installer mountpoints and working environment
switching root from initrd to actual installation system
Starting Proxmox installation
EFI boot mode detected, mounting efivars filesystem
Installing additional hardware drviers
Starting systemd-udevd version 257.9-1~deb13u1
Synthesizing the initial hotplug events (subsystems)
Synthesizing the initial hotplug events (devices)
mount: devpts mounted on /dev/pts.ated
/bin/dbus-daemon
starting D-Bus daemon
Attempting to get DHCP leases.....
Listening on LPF/wlp195s0/{mac-address}
Sending on LPF/wlp195s0/{mac-address}
Listening on LPF/enx{mac-address}/{mac-address}
Sending on LPF/enx{mac-address}/{mac-address}
Failed to get interface index: No such device

If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.

exiting

Installation aborted - unable to continue

Reading the guide, when I select Graphical installation I'm to be prompted to accept an agreement and then select the hard disk(s) I want to use. Instead I get command/terminal screen as 'root@proxmox' with the text above.