FreeRADIUS appliance - steps

apmuthu

Renowned Member
Feb 26, 2009
871
11
83
Chennai - India & Singapore
github.com
In attempting to build a FreeRADIUS appliance using DAB, we begin with a stock debian 5 template from OpenVZ.org:
Links referred to:
http://packages.debian.org/lenny-backports/i386/freeradius/download
http://wirelessafrica.meraka.org.za/wiki/index.php/Antoine's_Research
http://www.howtoforge.com/wifi_hotspot_setup

OpenVZ template for latest 32bit Debian 5 (132 MB dated 3rd Feb 2010)
http://download.openvz.org/template/precreated/debian-5.0-x86.tar.gz
start the container

Code:
apt-get update
apt-get dist-upgrade
apt-get install apache2 mysql-server php5 php5-mysql php5-snmp 
apt-get install php5-mcrypt php5-curl php5-gd php5-imap php5-radius php-pear
apt-get install zip unzip
apache2ctl restart
Since freeradius stop does not work correctly in debian, we enable RHEL service like commands:
Code:
apt-get install sysvconfig
service freeradius stop will work correctly when freeradius is installed.

***** debian5 backup *********

Enable lenny-backports by appending the following to /etc/apt/sources.list
Code:
deb [URL]http://www.backports.org/debian[/URL] lenny-backports main
or
deb [URL]http://www.backports.org/debian[/URL] lenny-backports main contrib non-free

If you want to get your packages from backports upgraded automatically the following entry in
/etc/apt/preferences should be (create the file if absent) sufficient:
Code:
Package: *
Pin: release a=lenny-backports
Pin-Priority: 200
Now install the freeradius package
Code:
apt-get update
apt-get install debian-backports-keyring
apt-get update
apt-get install snmp rrdtool
apt-get -t lenny-backports install freeradius freeradius-mysql
apache2ctl restart
Comment out the freerad user and group in /etc/freeradius/radiusd.conf (otherwise we will have to make the www-data user a member of the freerad group.

Configure FreeRADIUS to connect to the mysql database in /etc/freeradius/sql.conf and modify /etc/freeradius/radiusd.conf to authenticate using sql by uncommenting out the include line for the sql.conf file. Uncomment out lines beginning with sql under authorize, accounting, session, post-auth sections in /etc/freeradius/sites-available/default .
 
Last edited:
Re: FreeRADIUS appliance - install output

# apt-get -t lenny-backports install freeradius
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  freeradius-common freeradius-utils libfreeradius2 libpcap0.8
Suggested packages:
  freeradius-ldap freeradius-postgresql freeradius-mysql freeradius-krb5
The following NEW packages will be installed:
  freeradius freeradius-common freeradius-utils libfreeradius2 libpcap0.8
0 upgraded, 5 newly installed, 0 to remove and 23 not upgraded.
Need to get 1102kB of archives.
After this operation, 4067kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 [URL="http://ftp.debian.org/"]http://ftp.debian.org[/URL] lenny/main libpcap0.8 0.9.8-5 [94.4kB]
Get:2 [URL="http://www.backports.org/"]http://www.backports.org[/URL] lenny-backports/main libfreeradius2 2.1.8+dfsg-1~bpo50+1 [99.9kB]
Get:3 [URL="http://www.backports.org/"]http://www.backports.org[/URL] lenny-backports/main freeradius-common 2.1.8+dfsg-1~bpo50+1 [224kB]
Get:4 [URL="http://www.backports.org/"]http://www.backports.org[/URL] lenny-backports/main freeradius 2.1.8+dfsg-1~bpo50+1 [598kB]
Get:5 [URL="http://www.backports.org/"]http://www.backports.org[/URL] lenny-backports/main freeradius-utils 2.1.8+dfsg-1~bpo50+1 [85.0kB]
Fetched 1102kB in 6s (164kB/s)
Selecting previously deselected package libfreeradius2.
(Reading database ... 20515 files and directories currently installed.)
Unpacking libfreeradius2 (from .../libfreeradius2_2.1.8+dfsg-1~bpo50+1_i386.deb) ...
Selecting previously deselected package freeradius-common.
Unpacking freeradius-common (from .../freeradius-common_2.1.8+dfsg-1~bpo50+1_all.deb) ...
Selecting previously deselected package freeradius.
Unpacking freeradius (from .../freeradius_2.1.8+dfsg-1~bpo50+1_i386.deb) ...
Selecting previously deselected package libpcap0.8.
Unpacking libpcap0.8 (from .../libpcap0.8_0.9.8-5_i386.deb) ...
Selecting previously deselected package freeradius-utils.
Unpacking freeradius-utils (from .../freeradius-utils_2.1.8+dfsg-1~bpo50+1_i386.deb) ...
Processing triggers for man-db ...
Setting up libfreeradius2 (2.1.8+dfsg-1~bpo50+1) ...
Setting up freeradius-common (2.1.8+dfsg-1~bpo50+1) ...
Adding user freerad to group shadow
Setting up freeradius (2.1.8+dfsg-1~bpo50+1) ...
warning: --update given but /var/run/freeradius does not exist
stripping trailing /
stripping trailing /
stripping trailing /
Updating default SSL certificate settings, if any...
Adding user freerad to group ssl-cert
Generating DH parameters, 1024 bit long safe prime, generator 2
This is going to take a long time
.........................................................................+...........++*++*++*
Starting FreeRADIUS daemon: freeradius.
Setting up libpcap0.8 (0.9.8-5) ...
Setting up freeradius-utils (2.1.8+dfsg-1~bpo50+1) ...

# apt-get -t lenny-backports install freeradius-mysql
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libmysqlclient16 mysql-common
The following NEW packages will be installed:
  freeradius-mysql libmysqlclient16
The following packages will be upgraded:
  mysql-common
1 upgraded, 2 newly installed, 0 to remove and 22 not upgraded.
Need to get 2067kB of archives.
After this operation, 4518kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 [URL="http://www.backports.org/"]http://www.backports.org[/URL] lenny-backports/main mysql-common 5.1.43-1~bpo50+1 [70.9kB]
Get:2 [URL="http://www.backports.org/"]http://www.backports.org[/URL] lenny-backports/main libmysqlclient16 5.1.41-3~bpo50+1 [1959kB]
Get:3 [URL="http://www.backports.org/"]http://www.backports.org[/URL] lenny-backports/main freeradius-mysql 2.1.8+dfsg-1~bpo50+1 [36.6kB]
Fetched 2067kB in 16s (127kB/s)
(Reading database ... 21006 files and directories currently installed.)
Preparing to replace mysql-common 5.0.51a-24+lenny3 (using .../mysql-common_5.1.43-1~bpo50+1_all.deb) ...
Unpacking replacement mysql-common ...
Selecting previously deselected package libmysqlclient16.
Unpacking libmysqlclient16 (from .../libmysqlclient16_5.1.41-3~bpo50+1_i386.deb) ...
Selecting previously deselected package freeradius-mysql.
Unpacking freeradius-mysql (from .../freeradius-mysql_2.1.8+dfsg-1~bpo50+1_i386.deb) ...
Setting up mysql-common (5.1.43-1~bpo50+1) ...
Installing new version of config file /etc/mysql/my.cnf ...
Setting up libmysqlclient16 (5.1.41-3~bpo50+1) ...
Setting up freeradius-mysql (2.1.8+dfsg-1~bpo50+1) ...
Stopping FreeRADIUS daemon: freeradius.
Starting FreeRADIUS daemon: freeradius.
 
Re: FreeRADIUS appliance - running it

# freeradius -X
Code:
FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan  3 2010 at 15:51:52
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Code:
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = "testing123"
        response_window = 20
        max_outstanding = 65536
        require_message_authenticator = no
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        num_pings_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "testing123"
        nastype = "other"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating pap
  pap {
        encryption_scheme = "auto"
        auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating chap
 Module: Linked to module rlm_mschap
 Module: Instantiating mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = no
  }
 Module: Linked to module rlm_unix
 Module: Instantiating unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 4096
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        pem_file_type = yes
        private_key_file = "/etc/freeradius/certs/server.key"
        certificate_file = "/etc/freeradius/certs/server.pem"
        CA_file = "/etc/freeradius/certs/ca.pem"
        private_key_password = "whatever"
        dh_file = "/etc/freeradius/certs/dh"
        random_file = "/etc/freeradius/certs/random"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
        make_cert_command = "/etc/freeradius/certs/bootstrap"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
        with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating suffix
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating files
  files {
        usersfile = "/etc/freeradius/users"
        acctusersfile = "/etc/freeradius/acct_users"
        preproxy_usersfile = "/etc/freeradius/preproxy_users"
        compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        perm = 384
        callerid = yes
  }
..... continued on next post
 
Re: FreeRADIUS appliance - running it

Code:
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
        attrsfile = "/etc/freeradius/attrs.access_reject"
        key = "%{User-Name}"
  }
 } # modules
} # server
server {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating preprocess
  preprocess {
        huntgroups = "/etc/freeradius/huntgroups"
        hints = "/etc/freeradius/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
SQL instantiation outpu listed in next post goes here
Code:
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
Code:
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
 
Last edited:
Re: FreeRADIUS appliance - SQL instantiation output

Code:
 Module: Linked to module rlm_sql
 Module: Instantiating sql
  sql {
        driver = "rlm_sql_mysql"
        server = "localhost"
        port = ""
        login = "radius"
        password = "radpass"
        radius_db = "radius"
        read_groups = yes
        sqltrace = no
        sqltracefile = "/var/log/freeradius/sqltrace.sql"
        readclients = no
        deletestalesessions = yes
        num_sql_socks = 5
        lifetime = 0
        max_queries = 0
        sql_user_name = "%{User-Name}"
        default_user_profile = ""
        nas_query = "SELECT id, nasname, shortname, type, secret FROM nas"
        authorize_check_query = "SELECT id, username, attribute, value, op           FROM radcheck           WHERE username = '%{SQL-User-Name}'           ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute, value, op           FROM radreply           WHERE username = '%{SQL-User-Name}'           ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname, attribute,           Value, op           FROM radgroupcheck           WHERE groupname = '%{Sql-Group}'           ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname, attribute,           value, op           FROM radgroupreply           WHERE groupname = '%{Sql-Group}'           ORDER BY id"
        accounting_onoff_query = "          UPDATE radacct           SET              acctstoptime       =  '%S',              acctsessiontime    =  unix_timestamp('%S') -                                    unix_timestamp(acctstarttime),              acctterminatecause =  '%{Acct-Terminate-Cause}',              acctstopdelay      =  %{%{Acct-Delay-Time}:-0}           WHERE acctstoptime IS NULL           AND nasipaddress      =  '%{NAS-IP-Address}'           AND acctstarttime     <= '%S'"
        accounting_update_query = "           UPDATE radacct           SET              framedipaddress = '%{Framed-IP-Address}',              acctsessiontime     = '%{Acct-Session-Time}',              acctinputoctets     = '%{%{Acct-Input-Gigawords}:-0}'  << 32 |                                    '%{%{Acct-Input-Octets}:-0}',              acctoutputoctets    = '%{%{Acct-Output-Gigawords}:-0}' << 32 |                                    '%{%{Acct-Output-Octets}:-0}'           WHERE acctsessionid = '%{Acct-Session-Id}'           AND username        = '%{SQL-User-Name}'           AND nasipaddress    = '%{NAS-IP-Address}'"
        accounting_update_query_alt = "           INSERT INTO radacct             (acctsessionid,    acctuniqueid,      username,              realm,            nasipaddress,      nasportid,              nasporttype,      acctstarttime,     acctsessiontime,              acctauthentic,    connectinfo_start, acctinputoctets,              acctoutputoctets, calledstationid,   callingstationid,              servicetype,      framedprotocol,    framedipaddress,              acctstartdelay,   xascendsessionsvrkey)           VALUES             ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',              '%{NAS-Port-Type}',              DATE_SUB('%S',                       INTERVAL (%{%{Acct-Session-Time}:-0} +                                 %{%{Acct-Delay-Time}:-0}) SECOND),                       '%{Acct-Session-Time}',              '%{Acct-Authentic}', '',              '%{%{Acct-Input-Gigawords}:-0}' << 32 |              '%{%{Acct-Input-Octets}:-0}',              '%{%{Acct-Output-Gigawords}:-0}' << 32 |              '%{%{Acct-Output-Octets}:-0}',              '%{Called-Station-Id}', '%{Calling-Station-Id}',              '%{Service-Type}', '%{Framed-Protocol}',              '%{Framed-IP-Address}',              '0', '%{X-Ascend-Session-Svr-Key}')"
        accounting_start_query = "           INSERT INTO radacct             (acctsessionid,    acctuniqueid,     username,              realm,            nasipaddress,     nasportid,              nasporttype,      acctstarttime,    acctstoptime,              acctsessiontime,  acctauthentic,    connectinfo_start,              connectinfo_stop, acctinputoctets,  acctoutputoctets,              calledstationid,  callingstationid, acctterminatecause,              servicetype,      framedprotocol,   framedipaddress,              acctstartdelay,   acctstopdelay,    xascendsessionsvrkey)           VALUES             ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',              '%{NAS-Port-Type}', '%S', NULL,              '0', '%{Acct-Authentic}', '%{Connect-Info}',              '', '0', '0',              '%{Called-Station-Id}', '%{Calling-Station-Id}', '',              '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',              '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
        accounting_start_query_alt = "           UPDATE radacct SET              acctstarttime     = '%S',              acctstartdelay    = '%{%{Acct-Delay-Time}:-0}',              connectinfo_start = '%{Connect-Info}'           WHERE acctsessionid  = '%{Acct-Session-Id}'           AND username         = '%{SQL-User-Name}'           AND nasipaddress     = '%{NAS-IP-Address}'"
        accounting_stop_query = "           UPDATE radacct SET              acctstoptime       = '%S',              acctsessiontime    = '%{Acct-Session-Time}',              acctinputoctets    = '%{%{Acct-Input-Gigawords}:-0}' << 32 |                                   '%{%{Acct-Input-Octets}:-0}',              acctoutputoctets   = '%{%{Acct-Output-Gigawords}:-0}' << 32 |                                   '%{%{Acct-Output-Octets}:-0}',              acctterminatecause = '%{Acct-Terminate-Cause}',              acctstopdelay      = '%{%{Acct-Delay-Time}:-0}',              connectinfo_stop   = '%{Connect-Info}'           WHERE acctsessionid   = '%{Acct-Session-Id}'           AND username          = '%{SQL-User-Name}'           AND nasipaddress      = '%{NAS-IP-Address}'"
        accounting_stop_query_alt = "           INSERT INTO radacct             (acctsessionid, acctuniqueid, username,              realm, nasipaddress, nasportid,              nasporttype, acctstarttime, acctstoptime,              acctsessiontime, acctauthentic, connectinfo_start,              connectinfo_stop, acctinputoctets, acctoutputoctets,              calledstationid, callingstationid, acctterminatecause,              servicetype, framedprotocol, framedipaddress,              acctstartdelay, acctstopdelay)           VALUES             ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',              '%{NAS-Port-Type}',              DATE_SUB('%S',                  INTERVAL (%{%{Acct-Session-Time}:-0} +                  %{%{Acct-Delay-Time}:-0}) SECOND),              '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '',              '%{Connect-Info}',              '%{%{Acct-Input-Gigawords}:-0}' << 32 |              '%{%{Acct-Input-Octets}:-0}',              '%{%{Acct-Output-Gigawords}:-0}' << 32 |              '%{%{Acct-Output-Octets}:-0}',              '%{Called-Station-Id}', '%{Calling-Station-Id}',              '%{Acct-Terminate-Cause}',              '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',              '0', '%{%{Acct-Delay-Time}:-0}')"
        group_membership_query = "SELECT groupname           FROM radusergroup           WHERE username = '%{SQL-User-Name}'           ORDER BY priority"
        connect_failure_retry_delay = 60
        simul_count_query = ""
        simul_verify_query = "SELECT radacctid, acctsessionid, username,                                nasipaddress, nasportid, framedipaddress,                                callingstationid, framedprotocol                                FROM radacct                                WHERE username = '%{SQL-User-Name}'                                AND acctstoptime IS NULL"
        postauth_query = "INSERT INTO radpostauth                           (username, pass, reply, authdate)                           VALUES (                           '%{User-Name}',                           '%{%{User-Password}:-%{Chap-Password}}',                           '%{reply:Packet-Type}', '%S')"
        safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to [EMAIL="radius@localhost:/radius"]radius@localhost:/radius[/EMAIL]
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4