First time installing, hangs on booting

E

Egert143

Member
Mar 26, 2021
22
0
6
45
Hello

First time posting here and also first time trying to install Proxmox.

Unfortunately after installing Proxmox and booting it up, it seems to stop at [sdc] Attached SCSI removable disk and won't load anymore. Also the ip i set in installation wizard doesent respond to ping.

DFC3-EEAB-70-E4-4-A57-8-C51-898793-BF6-DF1.jpg
 
Hello

Iso is latest. Hardware is old IBM BladeCenter H with similar age blades (very old hardware :) ) was quriouse if i could use blades for virtualisation. When i installed Proxmox on newer hardware it started working fine. So must be old hardware fault.

Egert
 
I'm having the same issue.

Having install PVE 6.3 on a Ryzen powered system with an NVMe for the boot drive, I decided it was time it put it on a proper server.
Its a SunServer X4-2L (Dual Xeon E5-2650 v2 and 128GB DDR3)
The installation of PVE 6.4-1 seems to have go fine, with the installation being to a ZFS (RAID1) partition.

Upon reboot, the system stops progressing through the boot process but stopped before it got to the login screen. The last message reading "ses 4:0:2:0: Attached Enclosure device"
There are no errors visible on the display

The install medium was a USB drive written with Gnome Disks on a desktop running Fedora

Much like Egret143's the hardware is pretty old and the BIOS is very old (requires a support contract with Oracle to download)

I'll try PVE 6.3-1, see if that make and difference. it is the first time I've installed PVE to a ZFS partition.
 
With PVE 6.3-1 there is an error message


Code: 
Command: /sbin/zpool import -n    'rpool'
Message: cannot import 'rpool': no such pool availiable
Error: 1

Failed to import pool 'rpool'
Manually import the pool and exit.

The the boot process ejects you into BusyBox
 
You must log in or register to reply here.
Top Bottom