failed to install proxmox on board with i225v 2.5g nic(msi z690 edge ti)

[saberlion]

Hardware:
MSI MPG Z690 EDGE TI WIFI DDR4(Intel i225-v 2.5g nic)
i7 13700k

What I did:
1. Download and install pve-7.3(latest) failed(picture below)
2. Install saved pve-7.2 iso failed(error info similar to 7.3, `ip link show` shows nothing about this 2.5g nic)
3. Install deepin. Enter the system and found network not available

Seems that pve system lack i225v nic driver.
So how should I install pve on this board since 2.5g nic driver not included in the iso?
Any idea are appreciated.

----------------------------------------------
update01

Another boot into pve-7.3 and successfully found the ip but still abort. It shows:
Cannot run in framebuffer mode. please specify busids

 

[saberlion]

Problem solved.
https://gist.github.com/sergey-cheperis/530666bc5d7064185ab72bfcaeb19ff1
Notice: xorg.conf.new location is / , not shown in the above link.

 

[Softlution]

I was getting the same installing on Z690 motherboards. I thought it was a motherboards or cpu issue but I was wrong. I solved the xorg issue following this guide https://youtu.be/-6fRTpmmuHs