I want to add a graphic card to my proxmox VE system. I have a GeForce GT710 2GB DDR3 graphic board, which I'm connecting through a PCI Express 3.0/2.0 x16 slot (gray, operating in x16 mode) on my ASUS Prime B250-PRO motherboard.
During the system boot process, the green LED remains on, but when the system is fully powered on and ready, the green LED turns off.
I've checked my BIOS and the "Realtek LAN Controller" is "Enabled". I've also verified my IP address using "ip a" and checked "/etc/network/interfaces", and everything apperas to be ok and enabled.
My goal is to enable IOMMU.
Has anyone else experienced a similar issue? Thank you in advance for any help
During the system boot process, the green LED remains on, but when the system is fully powered on and ready, the green LED turns off.
I've checked my BIOS and the "Realtek LAN Controller" is "Enabled". I've also verified my IP address using "ip a" and checked "/etc/network/interfaces", and everything apperas to be ok and enabled.
My goal is to enable IOMMU.
Has anyone else experienced a similar issue? Thank you in advance for any help