eth1 LAN vmbr1 configuration while keeping eth0=>vmbr0 alive

[Rick L]

Two nics ,
eth0 public IP => vmbr0
eth1 LAN from pfsense with public IP

The vmbr0 was set up automatically on install

How to properly set up vmbr1 for eth1 for use with VM's while keeping eth0 open - I have 10 TB bandwidth allowed on eth0

I have connection and all nics are up on both machines.

Thanks, Rick

 

[Rick L]

What I have at the moment

eth1 connected to FW appliance/ switch - so all CT's are managed and routed through eth1 multiple /29 , and have no association with eth0

eth0 has 10TB 1GB connection - using this for simply accessing proxmox seems a huge waste of resources.

Help me find a way to utilize this connection.

I wanted to bind the two drops on the FW - not an option at the time.

Thanks, Rick

 

[Rick L]

Well for now I simply made a CT, used eth0=>vmbr0 and I'll use iptables to keep things tight. Thinking of adding a VM untangle before this CT, then adding all content links through vmbr0 from vmbr1 CT's.