Hi All
anybody can help me !!!
I have 2 proxmox cluster nodes
By mistake by editing the cluster.conf file, now I don't have write access for correct it.
Example:
root@kvm1:/etc/pve# touch kk.txt
touch: cannot touch `kk.txt': Permission denied
or the services of cluster no start:
root@kvm1:/etc/pve# service cman status
corosync is stopped
or if i execute:
root@kvm1:/etc/pve# service cman start
Starting cluster:
Checking if cluster has been disabled at boot... [ OK ]
Checking Network Manager... [ OK ]
Global setup... [ OK ]
Loading kernel modules... [ OK ]
Mounting configfs... [ OK ]
Starting cman... /etc/cluster/cluster.conf:18: parser error : Opening and ending tag mismatch: clusternodes line 11 and clusternode
</clusternode>
^
/etc/cluster/cluster.conf:25: parser error : expected '>'
</clusternode>
^
/etc/cluster/cluster.conf:25: parser error : Extra content at the end of the document
</clusternode>
^
Unable to get the configuration
/etc/cluster/cluster.conf:18: parser error : Opening and ending tag mismatch: clusternodes line 11 and clusternode
</clusternode>
^
/etc/cluster/cluster.conf:25: parser error : expected '>'
</clusternode>
^
/etc/cluster/cluster.conf:25: parser error : Extra content at the end of the document
</clusternode>
^
corosync [MAIN ] Corosync Cluster Engine ('1.4.3'): started and ready to provide service.
corosync [MAIN ] Corosync built-in features: nss
corosync [MAIN ] Unable to read config from /etc/cluster/cluster.conf
corosync [MAIN ] Corosync Cluster Engine exiting with status 8 at main.c:1665.
corosync died: Could not read cluster configuration Check cluster logs for details
[FAILED]
---- END -------
The error messages is the same on both nodes
I believe if i can edit the file cluster.conf for to leave it as it was before, everything will work out.
Thanks in advance to anyone who can help
Best Regards
Cesar
anybody can help me !!!
I have 2 proxmox cluster nodes
By mistake by editing the cluster.conf file, now I don't have write access for correct it.
Example:
root@kvm1:/etc/pve# touch kk.txt
touch: cannot touch `kk.txt': Permission denied
or the services of cluster no start:
root@kvm1:/etc/pve# service cman status
corosync is stopped
or if i execute:
root@kvm1:/etc/pve# service cman start
Starting cluster:
Checking if cluster has been disabled at boot... [ OK ]
Checking Network Manager... [ OK ]
Global setup... [ OK ]
Loading kernel modules... [ OK ]
Mounting configfs... [ OK ]
Starting cman... /etc/cluster/cluster.conf:18: parser error : Opening and ending tag mismatch: clusternodes line 11 and clusternode
</clusternode>
^
/etc/cluster/cluster.conf:25: parser error : expected '>'
</clusternode>
^
/etc/cluster/cluster.conf:25: parser error : Extra content at the end of the document
</clusternode>
^
Unable to get the configuration
/etc/cluster/cluster.conf:18: parser error : Opening and ending tag mismatch: clusternodes line 11 and clusternode
</clusternode>
^
/etc/cluster/cluster.conf:25: parser error : expected '>'
</clusternode>
^
/etc/cluster/cluster.conf:25: parser error : Extra content at the end of the document
</clusternode>
^
corosync [MAIN ] Corosync Cluster Engine ('1.4.3'): started and ready to provide service.
corosync [MAIN ] Corosync built-in features: nss
corosync [MAIN ] Unable to read config from /etc/cluster/cluster.conf
corosync [MAIN ] Corosync Cluster Engine exiting with status 8 at main.c:1665.
corosync died: Could not read cluster configuration Check cluster logs for details
[FAILED]
---- END -------
The error messages is the same on both nodes
I believe if i can edit the file cluster.conf for to leave it as it was before, everything will work out.
Thanks in advance to anyone who can help
Best Regards
Cesar