E
eugenyh
Guest
So, have PVE 2.1 (2.1-1/f9b0f63a), 6 nodes.
Attached iSCSI storage with several LUNs.
So, after night backup NAS01LUN0VG0 is dissapeared and get follow:
At iSCSI storage server all fine - no errors.
I can fix it:
vgcfgrestore NAS01LUN0VG0
and then
vgchange -ay NAS01LUN0VG0
after that NAS01LUN0VG0 is come back.
But, why it happening?
Attached iSCSI storage with several LUNs.
Code:
root@cl02-n02:~# pvscan
PV /dev/sdk VG NAS01LUN9VG0 lvm2 [2.00 TiB / 2.00 TiB free]
PV /dev/sdj VG NAS01LUN8VG0 lvm2 [2.00 TiB / 2.00 TiB free]
PV /dev/sdi VG NAS01LUN7VG0 lvm2 [511.98 GiB / 511.98 GiB free]
PV /dev/sdh VG NAS01LUN6VG0 lvm2 [511.98 GiB / 511.98 GiB free]
PV /dev/sdg VG NAS01LUN5VG0 lvm2 [255.99 GiB / 159.99 GiB free]
PV /dev/sdf VG NAS01LUN4VG0 lvm2 [255.99 GiB / 157.99 GiB free]
PV /dev/sde VG NAS01LUN3VG0 lvm2 [127.99 GiB / 31.99 GiB free]
PV /dev/sdd VG NAS01LUN2VG0 lvm2 [127.99 GiB / 95.99 GiB free]
PV /dev/sdc VG NAS01LUN1VG1 lvm2 [127.99 GiB / 26.99 GiB free]
PV /dev/sdb VG NAS01LUN0VG0 lvm2 [127.99 GiB / 31.98 GiB free]
PV /dev/sda2 VG pve lvm2 [297.59 GiB / 16.00 GiB free]
Total: 11 [6.29 TiB] / in use: 11 [6.29 TiB] / in no VG: 0 [0 ]
So, after night backup NAS01LUN0VG0 is dissapeared and get follow:
Code:
root@cl02-n02:~# pvscan
/dev/NAS01LUN0VG0/vzsnap-cl02-n02-0: read failed after 0 of 4096 at 21478965248: Input/output error
/dev/NAS01LUN0VG0/vzsnap-cl02-n02-0: read failed after 0 of 4096 at 21479022592: Input/output error
/dev/NAS01LUN0VG0/vzsnap-cl02-n02-0: read failed after 0 of 4096 at 0: Input/output error
/dev/NAS01LUN0VG0/vzsnap-cl02-n02-0: read failed after 0 of 4096 at 4096: Input/output error
[B]/dev/sdb: Checksum error[/B]
PV /dev/sdk VG NAS01LUN9VG0 lvm2 [2.00 TiB / 2.00 TiB free]
PV /dev/sdj VG NAS01LUN8VG0 lvm2 [2.00 TiB / 2.00 TiB free]
PV /dev/sdi VG NAS01LUN7VG0 lvm2 [511.98 GiB / 511.98 GiB free]
PV /dev/sdh VG NAS01LUN6VG0 lvm2 [511.98 GiB / 511.98 GiB free]
PV /dev/sdg VG NAS01LUN5VG0 lvm2 [255.99 GiB / 159.99 GiB free]
PV /dev/sdf VG NAS01LUN4VG0 lvm2 [255.99 GiB / 157.99 GiB free]
PV /dev/sde VG NAS01LUN3VG0 lvm2 [127.99 GiB / 29.99 GiB free]
PV /dev/sdd VG NAS01LUN2VG0 lvm2 [127.99 GiB / 95.99 GiB free]
PV /dev/sdc VG NAS01LUN1VG1 lvm2 [127.99 GiB / 26.99 GiB free]
PV /dev/sda2 VG pve lvm2 [297.59 GiB / 16.00 GiB free]
[B]PV /dev/sdb lvm2 [128.00 GiB][/B]
Total: 11 [6.29 TiB] / in use: 10 [6.17 TiB] / in no VG: 1 [128.00 GiB]
I can fix it:
vgcfgrestore NAS01LUN0VG0
and then
vgchange -ay NAS01LUN0VG0
after that NAS01LUN0VG0 is come back.
But, why it happening?
Last edited by a moderator: