PT-BR
Amigos, possuo um Dell R410, e estou tentando instalar o ProxMox 7.2.
A principio estava com alguns problemas para instalar a ultima versão, mas depois de atualizar a BIOS do servidor deu tudo certo.
Porém, ao finalizar a instalação, por mais que a interface de rede fique UP, eu não consigo ter comunicação externa a partir do servidor, olhando no TCPDUMP, consigo ver alguns pacotes de ARP e alguns em direção a BROADCAST, porém não consigo comunicação com o meu Gateway.
A placa de rede do servidor é uma BCM5716 e o módulo que está vinculada nela é o BNX 2 2.2.6.
Suspeito que seja algo relacionado ao módulo por que nesse mesmo servidor R410, já instalei um Windows Server 2019 e funcionou perfeitamente a parte de rede, e também já instalei um VMware 6.7, e também funcionou corretamente o Módulo.
Creio que a solução seja um DOWNGRADE desse módulo para a versão 2.2.4, que é a mesma versão que o VMware 6.7, utiliza em seu S.O.
é esse o caminho mesmo ? alguém consegue me dar uma dica do que posso fazer ?
EN (Google Translate)
Friends, I have a Dell R410, and I'm trying to install ProxMox 7.2.
At first I had some problems installing the latest version, but after updating the server's BIOS everything went well.
However, at the end of the installation, as much as the network interface is UP, I can't have external communication from the server, looking at TCPDUMP, I can see some ARP packets and some towards BROADCAST, but I can't communicate with my Gateway.
The server's network card is a BCM5716 and the module that is linked to it is BNX 2 2.2.6.
I suspect it is something related to the module because on that same R410 server, I already installed a Windows Server 2019 and the network part worked perfectly, and I also already installed a VMware 6.7, and the Module also worked correctly.
I believe the solution is a DOWNGRADE of this module to version 2.2.4, which is the same version that VMware 6.7 uses in its OS.
is this the way? Can anyone give me a hint what I can do?
Amigos, possuo um Dell R410, e estou tentando instalar o ProxMox 7.2.
A principio estava com alguns problemas para instalar a ultima versão, mas depois de atualizar a BIOS do servidor deu tudo certo.
Porém, ao finalizar a instalação, por mais que a interface de rede fique UP, eu não consigo ter comunicação externa a partir do servidor, olhando no TCPDUMP, consigo ver alguns pacotes de ARP e alguns em direção a BROADCAST, porém não consigo comunicação com o meu Gateway.
A placa de rede do servidor é uma BCM5716 e o módulo que está vinculada nela é o BNX 2 2.2.6.
Suspeito que seja algo relacionado ao módulo por que nesse mesmo servidor R410, já instalei um Windows Server 2019 e funcionou perfeitamente a parte de rede, e também já instalei um VMware 6.7, e também funcionou corretamente o Módulo.
Creio que a solução seja um DOWNGRADE desse módulo para a versão 2.2.4, que é a mesma versão que o VMware 6.7, utiliza em seu S.O.
é esse o caminho mesmo ? alguém consegue me dar uma dica do que posso fazer ?
EN (Google Translate)
Friends, I have a Dell R410, and I'm trying to install ProxMox 7.2.
At first I had some problems installing the latest version, but after updating the server's BIOS everything went well.
However, at the end of the installation, as much as the network interface is UP, I can't have external communication from the server, looking at TCPDUMP, I can see some ARP packets and some towards BROADCAST, but I can't communicate with my Gateway.
The server's network card is a BCM5716 and the module that is linked to it is BNX 2 2.2.6.
I suspect it is something related to the module because on that same R410 server, I already installed a Windows Server 2019 and the network part worked perfectly, and I also already installed a VMware 6.7, and the Module also worked correctly.
I believe the solution is a DOWNGRADE of this module to version 2.2.4, which is the same version that VMware 6.7 uses in its OS.
is this the way? Can anyone give me a hint what I can do?