" Cluster not ready - no quorum? (500)" Erā de VM ga kidō dekinai 51 / 5,000 VM fails to start with error "cluster not ready - no quorum? (500)"

K

kanhina1217

New Member
Jul 14, 2024
2
0
1
Hi

I have 4 nodes cluster.

Suddenly since yesterday I can't start the VM.

I tried various solutions but they all failed.

Here are some debugs.

pve1 /etc/pve/corosync.conf
Code: 
logging {
  debug: off
  to_syslog: yes
}

nodelist {
  node {
    name: pve1
    nodeid: 2
    quorum_votes: 1
    ring0_addr: 192.168.100.11
  }
  node {
    name: pve2
    nodeid: 3
    quorum_votes: 1
    ring0_addr: 192.168.100.12
  }
  node {
    name: pve3
    nodeid: 1
    quorum_votes: 1
    ring0_addr: 192.168.100.13
  }
  node {
    name: pve4
    nodeid: 4
    quorum_votes: 1
    ring0_addr: 192.168.100.14
  }
}

quorum {
  provider: corosync_votequorum
}

totem {
  cluster_name: cluster
  config_version: 5
  interface {
    linknumber: 0
  }
  ip_version: ipv4-6
  link_mode: passive
  secauth: on
  version: 2
}

results of # systemctl status pve-cluster
Code: 
● pve-cluster.service - The Proxmox VE cluster filesystem
     Loaded: loaded (/lib/systemd/system/pve-cluster.service; enabled; preset: enabled)
     Active: active (running) since Sun 2024-07-14 23:11:11 JST; 51min ago
    Process: 3951 ExecStart=/usr/bin/pmxcfs (code=exited, status=0/SUCCESS)
   Main PID: 3953 (pmxcfs)
      Tasks: 7 (limit: 18952)
     Memory: 35.4M
        CPU: 1.754s
     CGroup: /system.slice/pve-cluster.service
             └─3953 /usr/bin/pmxcfs

Jul 15 00:02:28 pve1 pmxcfs[3953]: [dcdb] crit: cpg_initialize failed: 2
Jul 15 00:02:28 pve1 pmxcfs[3953]: [status] crit: cpg_initialize failed: 2
Jul 15 00:02:34 pve1 pmxcfs[3953]: [quorum] crit: quorum_initialize failed: 2
Jul 15 00:02:34 pve1 pmxcfs[3953]: [confdb] crit: cmap_initialize failed: 2
Jul 15 00:02:34 pve1 pmxcfs[3953]: [dcdb] crit: cpg_initialize failed: 2
Jul 15 00:02:34 pve1 pmxcfs[3953]: [status] crit: cpg_initialize failed: 2
Jul 15 00:02:40 pve1 pmxcfs[3953]: [quorum] crit: quorum_initialize failed: 2
Jul 15 00:02:40 pve1 pmxcfs[3953]: [confdb] crit: cmap_initialize failed: 2
Jul 15 00:02:40 pve1 pmxcfs[3953]: [dcdb] crit: cpg_initialize failed: 2
Jul 15 00:02:40 pve1 pmxcfs[3953]: [status] crit: cpg_initialize failed: 2


results of # systemctl status corosync
Code: 
× corosync.service - Corosync Cluster Engine
     Loaded: loaded (/lib/systemd/system/corosync.service; enabled; preset: enabled)
     Active: failed (Result: exit-code) since Sun 2024-07-14 23:11:11 JST; 53min ago
   Duration: 3.477s
       Docs: man:corosync
             man:corosync.conf
             man:corosync_overview
    Process: 3959 ExecStart=/usr/sbin/corosync -f $COROSYNC_OPTIONS (code=exited, status=8)
   Main PID: 3959 (code=exited, status=8)
        CPU: 11ms

Jul 14 23:11:11 pve1 systemd[1]: Starting corosync.service - Corosync Cluster Engine...
Jul 14 23:11:11 pve1 corosync[3959]:   [MAIN  ] Corosync Cluster Engine  starting up
Jul 14 23:11:11 pve1 corosync[3959]:   [MAIN  ] Corosync built-in features: dbus monitoring watchdog systemd xmlconf vq>
Jul 14 23:11:11 pve1 corosync[3959]:   [MAIN  ] Could not open /etc/corosync/authkey: No such file or directory
Jul 14 23:11:11 pve1 corosync[3959]:   [MAIN  ] Corosync Cluster Engine exiting with status 8 at main.c:1417.
Jul 14 23:11:11 pve1 systemd[1]: corosync.service: Main process exited, code=exited, status=8/n/a
Jul 14 23:11:11 pve1 systemd[1]: corosync.service: Failed with result 'exit-code'.
Jul 14 23:11:11 pve1 systemd[1]: Failed to start corosync.service - Corosync Cluster Engine.

results of # pvecm nodes
Code: 
Cannot initialize CMAP service

results of # journalctl -xeu corosync.service
Code: 
░░ A start job for unit corosync.service has begun execution.
░░
░░ The job identifier is 1032.
Jul 14 23:11:11 pve1 corosync[3959]:   [MAIN  ] Corosync Cluster Engine  starting up
Jul 14 23:11:11 pve1 corosync[3959]:   [MAIN  ] Corosync built-in features: dbus monitoring watchdog systemd xmlconf vq>
Jul 14 23:11:11 pve1 corosync[3959]:   [MAIN  ] Could not open /etc/corosync/authkey: No such file or directory
Jul 14 23:11:11 pve1 corosync[3959]:   [MAIN  ] Corosync Cluster Engine exiting with status 8 at main.c:1417.
Jul 14 23:11:11 pve1 systemd[1]: corosync.service: Main process exited, code=exited, status=8/n/a
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ An ExecStart= process belonging to unit corosync.service has exited.
░░
░░ The process' exit code is 'exited' and its exit status is 8.
Jul 14 23:11:11 pve1 systemd[1]: corosync.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ The unit corosync.service has entered the 'failed' state with result 'exit-code'.
Jul 14 23:11:11 pve1 systemd[1]: Failed to start corosync.service - Corosync Cluster Engine.
░░ Subject: A start job for unit corosync.service has failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ A start job for unit corosync.service has finished with a failure.
░░
░░ The job identifier is 1032 and the job result is failed.

pve1 WebUI
1720969709186.png

pve2, pve3 WebUI
1720969774560.png

pve4 WebUI
1720969806676.png


I don't want to rebuild it if possible.
How can this be done?
 
You must log in or register to reply here.
Top Bottom