Cluster Knoten Will nicht gehen

L

luiluiboy014

Renowned Member
Aug 19, 2015
35
0
71
hey Leute habe ein problem weiß nicht was ic h falsch mache aber ein server will sich nicht in den knotenpunkt einrichten bekomme immer das hier

detected the following error(s):
* cannot use IP '217.79.152.86', it must be configured exactly once on local node!

TASK ERROR: Check if node may join a cluster failed!

Kann da einer helfen
 
Ähm Glaskugel... nö seh da nix.

Ein wenig mehr musst du uns schon geben. Was möchtest du tun, was hast du gemacht. Welche PVEversionen benutzt du, funktioniert Multicast zwischen deinen Knoten, hast wie im Wiki empfohlen ein eigenes Clustervlan etabliert. Wie ist deine Netzwerkkonfiguration?
 
ich habe immer die fehler hier

corosync.service - Corosync Cluster Engine
Loaded: loaded (/lib/systemd/system/corosync.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2018-08-22 10:23:05 CEST; 29s ago
Docs: man:corosync
man:corosync.conf
man:corosync_overview
Process: 7941 ExecStart=/usr/sbin/corosync -f $COROSYNC_OPTIONS (code=exited, status=20)
Main PID: 7941 (code=exited, status=20)
CPU: 87ms

Aug 22 10:23:05 Server2 corosync[7941]: info [WD ] no resources configured.
Aug 22 10:23:05 Server2 corosync[7941]: notice [SERV ] Service engine loaded: corosync watchdog service [7]
Aug 22 10:23:05 Server2 corosync[7941]: notice [QUORUM] Using quorum provider corosync_votequorum
Aug 22 10:23:05 Server2 corosync[7941]: crit [QUORUM] Quorum provider: corosync_votequorum failed to initialize.
Aug 22 10:23:05 Server2 corosync[7941]: error [SERV ] Service engine 'corosync_quorum' failed to load for reason 'configuration error: nodelist or quorum.expected_votes must be configured!'
Aug 22 10:23:05 Server2 corosync[7941]: error [MAIN ] Corosync Cluster Engine exiting with status 20 at service.c:356.
Aug 22 10:23:05 Server2 systemd[1]: corosync.service: Main process exited, code=exited, status=20/n/a
Aug 22 10:23:05 Server2 systemd[1]: Failed to start Corosync Cluster Engine.
Aug 22 10:23:05 Server2 systemd[1]: corosync.service: Unit entered failed state.
Aug 22 10:23:05 Server2 systemd[1]: corosync.service: Failed with result 'exit-code'.



Aug 22 10:23:11 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:23:11 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:23:17 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:23:17 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:23:17 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:23:17 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:23:23 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:23:23 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:23:23 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:23:23 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:23:29 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:23:29 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:23:29 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:23:29 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:23:35 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:23:35 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:23:35 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:23:35 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:23:41 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:23:41 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:23:41 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:23:41 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:23:44 Server2 pvedaemon[1776]: <root@pam> successful auth for user 'root@pam'
Aug 22 10:23:47 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:23:47 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:23:47 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:23:47 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:23:53 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:23:53 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:23:53 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:23:53 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:23:59 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:23:59 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:23:59 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:23:59 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:24:00 Server2 systemd[1]: Starting Proxmox VE replication runner...
-- Subject: Unit pvesr.service has begun start-up
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit pvesr.service has begun starting up.
Aug 22 10:24:01 Server2 pvesr[8024]: error with cfs lock 'file-replication_cfg': no quorum!
Aug 22 10:24:01 Server2 systemd[1]: pvesr.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Aug 22 10:24:01 Server2 systemd[1]: Failed to start Proxmox VE replication runner.
-- Subject: Unit pvesr.service has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit pvesr.service has failed.
--
-- The result is failed.
Aug 22 10:24:01 Server2 systemd[1]: pvesr.service: Unit entered failed state.
Aug 22 10:24:01 Server2 systemd[1]: pvesr.service: Failed with result 'exit-code'.
Aug 22 10:24:01 Server2 cron[1716]: (*system*vzdump) CAN'T OPEN SYMLINK (/etc/cron.d/vzdump)
Aug 22 10:24:05 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:24:05 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:24:05 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:24:05 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:24:11 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:24:11 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:24:11 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:24:11 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:24:17 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:24:17 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:24:17 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:24:17 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:24:23 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:24:23 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:24:23 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:24:23 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:24:29 Server2 pmxcfs[7957]: [quorum] crit: quorum_initialize failed: 2
Aug 22 10:24:29 Server2 pmxcfs[7957]: [confdb] crit: cmap_initialize failed: 2
Aug 22 10:24:29 Server2 pmxcfs[7957]: [dcdb] crit: cpg_initialize failed: 2
Aug 22 10:24:29 Server2 pmxcfs[7957]: [status] crit: cpg_initialize failed: 2
Aug 22 10:24:30 Server2 pveproxy[6699]: worker exit
Aug 22 10:24:30 Server2 pveproxy[1828]: worker 6699 finished
Aug 22 10:24:30 Server2 pveproxy[1828]: starting 1 worker(s)
Aug 22 10:24:30 Server2 pveproxy[1828]: worker 8060 started
Aug 22 10:24:30 Server2 pveproxy[8060]: /etc/pve/local/pveproxy-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1644.
 
Aug 22 10:24:01 Server2 pvesr[8024]: error with cfs lock 'file-replication_cfg': no quorum!

Kein quorum. Wie viele Nodes hast du? Wie viele sind im (HA?) Cluster?
 
Server 1
Quorum information
------------------
Date: Thu Aug 23 09:46:07 2018
Quorum provider: corosync_votequorum
Nodes: 1
Node ID: 0x00000001
Ring ID: 1/4
Quorate: Yes

Votequorum information
----------------------
Expected votes: 1
Highest expected: 1
Total votes: 1
Quorum: 1
Flags: Quorate

Membership information
----------------------
Nodeid Votes Name
0x00000001 1 150.0.20.158 (local)

Server 2
Corosync config '/etc/pve/corosync.conf' does not exist - is this node part of a cluster?
Cannot initialize CMAP service
 
so sieht das dann aus wenn ich beide als knoten haben will
Server 1
root@Server1:~# pvecm status
Quorum information
------------------
Date: Thu Aug 23 09:55:43 2018
Quorum provider: corosync_votequorum
Nodes: 1
Node ID: 0x00000001
Ring ID: 1/4
Quorate: No

Votequorum information
----------------------
Expected votes: 2
Highest expected: 2
Total votes: 1
Quorum: 2 Activity blocked
Flags:

Membership information
----------------------
Nodeid Votes Name
0x00000001 1 150.0.20.158 (local)



Server 2
root@Server2:~# pvecm status
Cannot initialize CMAP service
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back