Ceph disks of different sizes across nodes
- Thread starter logui
- Start date
As usual: it depends. You did not tell us how many of them you have on how many nodes. Larger systems (5 nodes with multiple OSD each) have no problem with different sizes.
If you have only three nodes with a single OSD each and the usual size=3/min_size=2: you can fill each OSD up to a maximum of ~400 GB (~80% of the smallest OSD). The reason is the size/min_size-definiton: every chunk needs to get stored on each OSD. So the smallest one defines the limit.
And no, it ist NOT an acceptable idea to go below size=3/min_size=2.
Disclaimer: I am not a Ceph specialist...
If you have only three nodes with a single OSD each and the usual size=3/min_size=2: you can fill each OSD up to a maximum of ~400 GB (~80% of the smallest OSD). The reason is the size/min_size-definiton: every chunk needs to get stored on each OSD. So the smallest one defines the limit.
And no, it ist NOT an acceptable idea to go below size=3/min_size=2.
Disclaimer: I am not a Ceph specialist...
Sorry for the lack of details, 3 nodes and 1 OSD per node, with the size already mentioned
You can use ~500GiB in total if each node only has one OSD.
As Ceph will store 3 replicas (1 per node) by default. Therefore, if the nodes have overall a different usable disk space for Ceph, the lowest one will be the limit.
This will get more nuanced once you have more than 3 nodes. Or more generally, more nodes than what is configured as "size".
As Ceph will store 3 replicas (1 per node) by default. Therefore, if the nodes have overall a different usable disk space for Ceph, the lowest one will be the limit.
This will get more nuanced once you have more than 3 nodes. Or more generally, more nodes than what is configured as "size".
Thank you for the information, Ceph was going to be an inefficient solution to me, due to the different disk sizes, therefore a lot of wasted disk space.
I came up with a different solution, I configured each disk with ZFS and I enabled replication across all nodes for the critical VMs, for my home settings its good enough, and I have PBS on top running daily. I think I have covered the basics.
I came up with a different solution, I configured each disk with ZFS and I enabled replication across all nodes for the critical VMs, for my home settings its good enough, and I have PBS on top running daily. I think I have covered the basics.
