Can't create windows VM

[HDmac]

I am trying to install windows to a new VM for eventual GPU passthrough. After I configure everything and start the VM I'm met with "Guest has not initialized the display (yet).".

Here is my config:

  -id 101 \
  -name windows-gaming \
  -no-shutdown \
  -chardev 'socket,id=qmp,path=/var/run/qemu-server/101.qmp,server=on,wait=off' \
  -mon 'chardev=qmp,mode=control' \
  -chardev 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5' \
  -mon 'chardev=qmp-event,mode=control' \
  -pidfile /var/run/qemu-server/101.pid \
  -daemonize \
  -smbios 'type=1,uuid=34584318-6b51-4c37-8f54-426ee6ad4d47' \
  -drive 'if=pflash,unit=0,format=raw,readonly=on,file=/usr/share/pve-edk2-firmware//OVMF_CODE_4M.secboot.fd' \
  -drive 'if=pflash,unit=1,format=raw,id=drive-efidisk0,size=540672,file=/dev/disk/by-id/scsi-STrueNAS_iSCSI_Disk_f62a799e32b1fe4' \
  -smp '12,sockets=1,cores=12,maxcpus=12' \
  -nodefaults \
  -boot 'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg' \
  -vnc 'unix:/var/run/qemu-server/101.vnc,password=on' \
  -no-hpet \
  -cpu 'kvm64,enforce,hv_ipi,hv_relaxed,hv_reset,hv_runtime,hv_spinlocks=0x1fff,hv_stimer,hv_synic,hv_time,hv_vapic,hv_vpindex,+kvm_pv_eoi,+kvm_pv_unhalt,+lahf_lm,+sep' \
  -m 8192 \
  -readconfig /usr/share/qemu-server/pve-q35-4.0.cfg \
  -device 'vmgenid,guid=12b9d644-3e71-4494-82ee-c05e6c15b663' \
  -device 'usb-tablet,id=tablet,bus=ehci.0,port=1' \
  -device 'VGA,id=vga,bus=pcie.0,addr=0x1' \
  -chardev 'socket,path=/var/run/qemu-server/101.qga,server=on,wait=off,id=qga0' \
  -device 'virtio-serial,id=qga0,bus=pci.0,addr=0x8' \
  -device 'virtserialport,chardev=qga0,name=org.qemu.guest_agent.0' \
  -iscsi 'initiator-name=iqn.1993-08.org.debian:01:d9ae2248d562' \
  -drive 'file=/mnt/pve/truenash-smb/template/iso/Win10_21H2_English_x64.iso,if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
  -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=100' \
  -drive 'file=/dev/disk/by-id/scsi-STrueNAS_iSCSI_Disk_3bddf582144192c,if=none,id=drive-virtio0,discard=on,format=raw,cache=none,aio=io_uring,detect-zeroes=unmap' \
  -device 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa' \
  -netdev 'type=tap,id=net0,ifname=tap101i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown' \
  -device 'e1000,mac=7A:52:A1:5E:A7:42,netdev=net0,bus=pci.0,addr=0x12,id=net0' \
  -rtc 'driftfix=slew,base=localtime' \
  -machine 'type=pc-q35-6.2+pve0' \
  -global 'kvm-pit.lost_tick_policy=discard'

I've tried two different windows 10 iso's. If I change the BIOS to SeaBIOS everything works fine. I'm new to proxmox so i'm not sure how to proceed from here. All my reading says this basic setup should work.