Hello team,
I've got 2 x proxmox hosts. One originally was Debian which was converted into proxmox by following the official guide (https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Jessie)
I've now installed a second host and done apt upgrade and it's all up to date. I configured IPv6 and IPv4 on it. I am able to access the host using IPv6 over SSH and ping6 out from the host (so IPv6 connectivity is definitely working). However, I can't access proxmox WebGUI over iPv6 (but it works over IPv4). In addition to configuring the IPv6 networking information in the WebGUI, what else do I need to do to make this work?
The version info is:
I've got 2 x proxmox hosts. One originally was Debian which was converted into proxmox by following the official guide (https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Jessie)
I've now installed a second host and done apt upgrade and it's all up to date. I configured IPv6 and IPv4 on it. I am able to access the host using IPv6 over SSH and ping6 out from the host (so IPv6 connectivity is definitely working). However, I can't access proxmox WebGUI over iPv6 (but it works over IPv4). In addition to configuring the IPv6 networking information in the WebGUI, what else do I need to do to make this work?
The version info is:
Code:
# pveversion --verbose
proxmox-ve: 4.4-86 (running kernel: 4.4.49-1-pve)
pve-manager: 4.4-13 (running version: 4.4-13/7ea56165)
pve-kernel-4.4.35-1-pve: 4.4.35-77
pve-kernel-4.4.49-1-pve: 4.4.49-86
lvm2: 2.02.116-pve3
corosync-pve: 2.4.2-2~pve4+1
libqb0: 1.0.1-1
pve-cluster: 4.0-49
qemu-server: 4.0-110
pve-firmware: 1.1-11
libpve-common-perl: 4.0-94
libpve-access-control: 4.0-23
libpve-storage-perl: 4.0-76
pve-libspice-server1: 0.12.8-2
vncterm: 1.3-2
pve-docs: 4.4-4
pve-qemu-kvm: 2.7.1-4
pve-container: 1.0-97
pve-firewall: 2.0-33
pve-ha-manager: 1.0-40
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u3
lxc-pve: 2.0.7-4
lxcfs: 2.0.6-pve1
criu: 1.6.0-1
novnc-pve: 0.5-9
smartmontools: 6.5+svn4324-1~pve80
zfsutils: 0.6.5.9-pve15~bpo80
