Hey everyone,
I recently started to build my homelab and IoT network, and I had Proxmox up and running till yesterday.
My Proxmox is actually on a MiniPC and has the following containers, all installed with proxmox-helper-scripts:
- Home Assistant
- MQTT
- Zigbee2MQTT
- Node-Red
I am waiting for a usb ethernet Nic to have two interfaces and start playing with OPNsense.
I can access HAOS with any issue, but I can't access the web gui of all the LXC based containers.
The network is set as follows:
- Mikrotik router with vlans for management (5), iot (30) and general use (10).
- TP-Link smart switch which is set to trunk the vlans 5 and 30 on port 6 (where the mini pc is connected).
Proxmox now works fine with VLAN tagged connection on Linux VLAN (10.35.5.2).
The default bridge has VLAN aware on.
Let me know which more info can be useful for debugging that. I'm new to Proxmox so I don't know which are the most important things to share.
Thanks!
Mitch
I recently started to build my homelab and IoT network, and I had Proxmox up and running till yesterday.
My Proxmox is actually on a MiniPC and has the following containers, all installed with proxmox-helper-scripts:
- Home Assistant
- MQTT
- Zigbee2MQTT
- Node-Red
I am waiting for a usb ethernet Nic to have two interfaces and start playing with OPNsense.
I can access HAOS with any issue, but I can't access the web gui of all the LXC based containers.
The network is set as follows:
- Mikrotik router with vlans for management (5), iot (30) and general use (10).
- TP-Link smart switch which is set to trunk the vlans 5 and 30 on port 6 (where the mini pc is connected).
Proxmox now works fine with VLAN tagged connection on Linux VLAN (10.35.5.2).
The default bridge has VLAN aware on.
Let me know which more info can be useful for debugging that. I'm new to Proxmox so I don't know which are the most important things to share.
Thanks!
Mitch