Hello!
I have problem setting mtu 9000 on a nic on one of two proxmox nodes after upgrading to kernel 2.6.32-32-pve.If I rollback to kernel 2.6.32-31-pve there is not such issue.
Below is some info:
Is this a driver issue?
thank you
I have problem setting mtu 9000 on a nic on one of two proxmox nodes after upgrading to kernel 2.6.32-32-pve.If I rollback to kernel 2.6.32-31-pve there is not such issue.
Below is some info:
Code:
root@proxmox2:~# pveversion -v
proxmox-ve-2.6.32: 3.2-136 (running kernel: 2.6.32-32-pve)
pve-manager: 3.2-30 (running version: 3.2-30/1d095287)
pve-kernel-2.6.32-32-pve: 2.6.32-136
pve-kernel-2.6.32-29-pve: 2.6.32-126
pve-kernel-2.6.32-31-pve: 2.6.32-132
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-1
pve-cluster: 3.0-14
qemu-server: 3.1-34
pve-firmware: 1.1-3
libpve-common-perl: 3.0-19
libpve-access-control: 3.0-15
libpve-storage-perl: 3.0-22
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.1-5
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1
Code:
root@proxmox2:~# ethtool -i eth0
driver: e1000e
version: 3.1.0.2-NAPI
firmware-version: 0.13-4
bus-info: 0000:00:19.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
Code:
root@proxmox2:~# ifconfig eth0 mtu 9000
SIOCSIFMTU: Invalid argumentIs this a driver issue?
thank you
