[SOLVED] Call trace during installtion - DVB: Unable to find symbol stv090x_attach()

[bogo22]

Hello,
i just wanted to install proxmox VE 4.3 on my server.
I got some errors during installations:
"DVB: Unable to find symbol stv090x_attach()" and a call trace

My Hardware:
Mainboard: Supermicro X10SRL-F (2011-3)
CPU: E5-1650v3
RAM: 3x 32GB Samsung DDR4 ECC
Couple of Consumer-SSD's on the onboard sata-controller
Pcie-Devices:

• 2x IBM M1015 HBA (IT Mode)
• 1x Intel i350-T4 NIC (1GB)
• 1x Intel x540-T1 NIC (10GB)
• 1x Digital Device Cine S2 v6.5 (TV Tuner Card)

Thanks for any help

 

[walterced]

Disable to bios ethernet card, after install proxmox re-active it.

 

[lilCDNnrg]

I am not sure if this will help or not but when I did the install on my 2 nodes I took everything out of them that was not built in and unplugged any extra drives. Installed with just the basics then added the extra NICs and then the HDDs.

 

[bogo22]

I am not sure if this will help or not but when I did the install on my 2 nodes I took everything out of them that was not built in and unplugged any extra drives. Installed with just the basics then added the extra NICs and then the HDDs.

Thank you very much. I Just put step by step all pcie cards and other stuff out of the server. And it works. The dvb card generates the errors during installation. Sometimes the solution can be that easy