Hi,
We have 3 Proxmox hosts in a cluster which attach to 2 separate switches. Each host has 2 LACP bonds, and both of these bonds are bridged through vmbr0. We also have 3 VLANs we need to access, vlan 200 (management), vlan 20 (production) and vlan 150 (san). vlan 200 is untagged on vmbr0, vlan 20 and 150 are tagged. VLAN 200 is working fine, but we can't bring up the vlans. /etc/network/interfaces follows:
# network interface settings
auto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
iface eth2 inet manual
iface eth3 inet manual
auto vlan20
iface vlan20 inet manual
vlan_raw_device bond0.20
auto vlan150
iface vlan150 inet manual
vlan_raw_device bond1.150
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode 802.3ad
auto bond1
iface bond1 inet manual
slaves eth2 eth3
bond_miimon 100
bond_mode 802.3ad
auto vmbr0
iface vmbr0 inet static
address 10.200.1.61
netmask 255.255.255.0
gateway 10.200.1.250
bridge_ports bond0 bond1
bridge_stp off
bridge_fd 0
auto vmbr20
iface vmbr20 inet static
address 10.20.1.61
netmask 255.255.255.0
bridge_ports vlan20
bridge_stp off
bridge_fd 0
auto vmbr150
iface vmbr150 inet static
address 10.150.1.61
netmask 255.255.255.0
bridge_ports vlan150
bridge_stp off
bridge_fd 0
The server is version 2. Any help bringing up vlans 20 and 150 would be appreciated.
We have 3 Proxmox hosts in a cluster which attach to 2 separate switches. Each host has 2 LACP bonds, and both of these bonds are bridged through vmbr0. We also have 3 VLANs we need to access, vlan 200 (management), vlan 20 (production) and vlan 150 (san). vlan 200 is untagged on vmbr0, vlan 20 and 150 are tagged. VLAN 200 is working fine, but we can't bring up the vlans. /etc/network/interfaces follows:
# network interface settings
auto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
iface eth2 inet manual
iface eth3 inet manual
auto vlan20
iface vlan20 inet manual
vlan_raw_device bond0.20
auto vlan150
iface vlan150 inet manual
vlan_raw_device bond1.150
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode 802.3ad
auto bond1
iface bond1 inet manual
slaves eth2 eth3
bond_miimon 100
bond_mode 802.3ad
auto vmbr0
iface vmbr0 inet static
address 10.200.1.61
netmask 255.255.255.0
gateway 10.200.1.250
bridge_ports bond0 bond1
bridge_stp off
bridge_fd 0
auto vmbr20
iface vmbr20 inet static
address 10.20.1.61
netmask 255.255.255.0
bridge_ports vlan20
bridge_stp off
bridge_fd 0
auto vmbr150
iface vmbr150 inet static
address 10.150.1.61
netmask 255.255.255.0
bridge_ports vlan150
bridge_stp off
bridge_fd 0
The server is version 2. Any help bringing up vlans 20 and 150 would be appreciated.