Hi all,
We ran an apt-get dist-upgrade yesterday on 4 test servers and all seemed OK, however later when I went to log into Proxmox the UI webpage was blank. During troubleshooting I tried apt-get dist-upgrade again and I get the following:
Looking around online I checked the hosts file entry to ensure the file is correct and it seems to be:
cat /etc/hosts:
pveversion -v:
dpkg --configure -a
The VMs are still running. I also checked the installed version of all packages in apt against a working install and they seem to be OK. Any ideas on what I can do to resolved this?
We ran an apt-get dist-upgrade yesterday on 4 test servers and all seemed OK, however later when I went to log into Proxmox the UI webpage was blank. During troubleshooting I tried apt-get dist-upgrade again and I get the following:
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
6 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up pve-firewall (2.0-33) ...
Failed to reload-or-restart pve-firewall.service: Unit pve-firewall.service is masked.
dpkg: error processing package pve-firewall (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of qemu-server:
qemu-server depends on pve-firewall; however:
Package pve-firewall is not configured yet.
dpkg: error processing package qemu-server (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pve-manager:
pve-manager depends on qemu-server (>= 1.1-1); however:
Package qemu-server is not configured yet.
pve-manager depends on pve-firewall; however:
Package pve-firewall is not configured yet.
dpkg: error processing package pve-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of proxmox-ve:
proxmox-ve depends on pve-manager; however:
Package pve-manager is not configured yet.
proxmox-ve depends on qemu-server; however:
Package qemu-server is not configured yet.
dpkg: error processing package proxmox-ve (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pve-ha-manager:
pve-ha-manager depends on qemu-server; however:
Package qemu-server is not configured yet.
dpkg: error processing package pve-ha-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pve-container:
pve-container depends on pve-ha-manager; however:
Package pve-ha-manager is not configured yet.
dpkg: error processing package pve-container (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
pve-firewall
qemu-server
pve-manager
proxmox-ve
pve-ha-manager
pve-container
E: Sub-process /usr/bin/dpkg returned an error code (1)Looking around online I checked the hosts file entry to ensure the file is correct and it seems to be:
cat /etc/hosts:
Code:
127.0.0.1 localhost.localdomain localhost
10.10.2.250 ievmsys1.crossflowpayments.co.uk ievmsys1 pvelocalhost
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostspveversion -v:
Code:
proxmox-ve: not correctly installed (running kernel: 4.4.6-1-pve)
pve-manager: not correctly installed (running version: 4.4-12/e71b7a74)
pve-kernel-4.4.6-1-pve: 4.4.6-48
pve-kernel-4.4.35-2-pve: 4.4.35-79
pve-kernel-4.4.40-1-pve: 4.4.40-80
lvm2: 2.02.116-pve3
corosync-pve: 2.4.2-1
libqb0: 1.0-1
pve-cluster: 4.0-48
qemu-server: not correctly installed
pve-firmware: 1.1-10
libpve-common-perl: 4.0-92
libpve-access-control: 4.0-23
libpve-storage-perl: 4.0-73
pve-libspice-server1: 0.12.8-1
vncterm: 1.3-1
pve-docs: 4.4-3
pve-qemu-kvm: 2.7.1-3
pve-container: not correctly installed
pve-firewall: not correctly installed
pve-ha-manager: not correctly installed
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u3
lxc-pve: 2.0.7-3
lxcfs: 2.0.6-pve1
criu: 1.6.0-1
novnc-pve: 0.5-8
smartmontools: 6.5+svn4324-1~pve80
zfsutils: 0.6.5.9-pve15~bpo80dpkg --configure -a
Code:
Setting up pve-firewall (2.0-33) ...
Failed to reload-or-restart pve-firewall.service: Unit pve-firewall.service is masked.
dpkg: error processing package pve-firewall (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of qemu-server:
qemu-server depends on pve-firewall; however:
Package pve-firewall is not configured yet.
dpkg: error processing package qemu-server (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of proxmox-ve:
proxmox-ve depends on qemu-server; however:
Package qemu-server is not configured yet.
dpkg: error processing package proxmox-ve (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pve-manager:
pve-manager depends on qemu-server (>= 1.1-1); however:
Package qemu-server is not configured yet.
pve-manager depends on pve-firewall; however:
Package pve-firewall is not configured yet.
dpkg: error processing package pve-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pve-ha-manager:
pve-ha-manager depends on qemu-server; however:
Package qemu-server is not configured yet.
dpkg: error processing package pve-ha-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pve-container:
pve-container depends on pve-ha-manager; however:
Package pve-ha-manager is not configured yet.
dpkg: error processing package pve-container (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
pve-firewall
qemu-server
proxmox-ve
pve-manager
pve-ha-manager
pve-containerThe VMs are still running. I also checked the installed version of all packages in apt against a working install and they seem to be OK. Any ideas on what I can do to resolved this?
Last edited: