Aeotec usb stick passthrough , ends with no permissions

[Fredddd]

Dear all,
I am new to proxmox and think I have seen and followed all instructions to my best newbie knowledge.

I would like to passthrough an aeotec zwave stick.
Here is the end with no permisisons:
ttyACM2 I called it and it gets no permissions.

Container:
root@zwavejsui:~# ls -la /dev/tty* crw-rw-rw- 1 nobody nogroup 5, 0 Dec 29 18:56 /dev/tty crw------- 1 root tty 136, 1 Dec 29 19:16 /dev/tty1 crw--w---- 1 root tty 136, 2 Dec 29 18:56 /dev/tty2 c--------- 0 nobody nogroup 166, 0 Dec 29 18:56 /dev/ttyACM2 root@zwavejsui:~# lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0658:0200 Sigma Designs, Inc. Aeotec Z-Stick Gen5 (ZW090) - UZB Bus 001 Device 003: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@zwavejsui:~#

on the host it looks like:
root@pve:~# lsusb Bus 001 Device 004: ID 0658:0200 Sigma Designs, Inc. Aeotec Z-Stick Gen5 (ZW090) - UZB ls -la /dev/tty* crw-rw-rw- 1 root dialout 166, 0 Dec 29 19:57 /dev/ttyACM0 lrwxrwxrwx 1 root root 7 Dec 29 19:57 /dev/ttyZwave -> ttyACM0


my container config

unprivileged: 1 lxc.cgroup2.devices.allow: c 189:* rwm lxc.mount.entry: usb-0658_0200-if00 dev/serial/by-id/usb-0658_0200-if00 none bind,optional,create=file lxc.cgroup.devices.allow: c 166:* rwm lxc.mount.entry: /dev/ttyZwave dev/ttyACM2 none bind,optional,create=file

and the udev file 99-usb-serial.rules
SUBSYSTEM=="tty", ATTRS{idVendor}=="0658", ATTRS{idProduct}=="0200" SYMLINK+="ttyZwave" KERNEL=="ttyACM[0-9]*",MODE="0666

looking for the bus shows:
root@pve:~# ls -l /dev/bus/usb/001/004
crw-rw-r-- 1 root root 189, 3 Dec 29 19:57 /dev/bus/usb/001/004


and also tried to pass it through by-id, which also does not work.


I would be glad if you could tell me why
c--------- 0 nobody nogroup 166, 0 Dec 29 18:56 /dev/ttyACM2 has no permissions set and how I can change that.

Thank you very much,
Roman