nautilus

  1. I

    [SOLVED] proxmox ceph ( Nautilus to Octopus) upgrade issue

    As part of upgrading to proxmox 7 i done the folling steps: upgraded all nodes to latest 6.4-13 rebooting everything upgrading cepth to Octopus , based on (https://pve.proxmox.com/wiki/Ceph_Nautilus_to_Octopus) after running ( ceph osd pool set POOLNAME pg_autoscale_mode on) on a pool it...
  2. t.lamprecht

    Upcoming Ceph 14.2 Nautilus EOL with 07/2021

    Friendly reminder that Ceph Nautilus is going EOL in July 2021, with only one final release (14.2.22) currently planned. If you still run a Ceph 14.2 Nautilus setup, we recommend planning an upgrade in the upcoming weeks or months to Ceph 15.2 Octopus, which at the time of writing is the newest...
  3. N

    ceph-volume lvm create => error connecting to the cluster

    Hello, i am trying to get ceph up and running again after migrating proxmox v5 to v6 on 3 nodes. After the upgrade the old lumious setup didn't work anymore due to 2 "ghost" monitors (mon.0 and mon.1). I couldn't remove them and the GUI says "mon_command failed - command not known (500) ". So...
  4. C

    Upgrade to PVE6 and Ceph Natuilus Failed

    Hi All, I'm hoping I can get some assistance here. I have been reading forums and guides to try and resolve this issue to no avail. Last night I upgraded my Proxmox VE to v6 and my Ceph to Nautilus (I followed the upgrade guide on Proxmox's website.) I assume at some point I did something wrong...
  5. J

    Unterstützung für unser CEPH-Cluster gesucht

    Hallo zusammen, aktuellen suchen wir jemanden, der für uns die Verwaltung und Überwachung von unserem CEPH-Cluster übernehmen kann. Dieses umfasst bei uns derzeit fünf Nodes mit Dual E5-CPUs und zwischen 256 und 512 GB RAM pro Node. Alle Nodes sind mit 2x 10 Gbit intern an unterschiedliche...
  6. B

    Using pg_autoscale in Ceph Nautilus on Proxmox

    Greetings everyone! I have installed Ceph Nautilus on Proxmox using the pveceph repositories. I then went on and installed the Nautilus Dashboard as well, as i intend to use the Ceph cluster for both Proxmox, and also make use of other Rados Gateways for general storage inside Ceph for a full...
  7. K

    Unable to create Ceph OSD

    Hello there, I recently upgraded from proxmox 5 to 6 as well as ceph luminous to nautilus. I wanted to go through and re-create the osds I have in my cluster. I ran into an issue with the second osd I wanted to convert (the first went fine). Here's what I get after I zap the disk: pveceph...