iscsi boot

  1. R

    [SOLVED] proxmox connects to iscsi targets after (failed) VM autostart?

    Hello, I found out that after proxmox starts VMs which have their disks on iscsi storage and are expected to autostart fail to do this because their storage is not ready yet. By the time I login to the web gui I can start the VMs by hand with no problem: ........... Aug 12 07:00:11 hv02...
  2. M

    [SOLVED] Installing PVE on an iSCSI boot LUN with multipathing

    Hello All, I've spent far too much time getting PVE installed in our Cisco UCS blade environment. So in the hope that it helps others, I will share my installation instructions. Thanks to those who provided little nuggets of information to help along the way. Feel free to take and improve; I'm...
  3. D

    [SOLVED] Wait for NFS/Iscsi before starting other vms

    Hello guys! i have truenas as a vm inside of proxmox one issue im facing is sometimes my other VMs run before truenas is actually running so the NFS / Iscsi wont be available. i know i can use startup delay i tried that and did set it to 60s but its not consistent sometimes it takes around 1:30m...
  4. O

    iscsi not coming up properly after host reboot

    We have hosts with multiple iSCSI datastores. After updating and rebooting a host, the host status shows a green check, but the iSCSI datastores display a grey question mark. Running `systemctl restart pvestatd` resolves the issue and the iSCSI datastores become available again. Before...
  5. S

    iscsi connection lost after reboot

    Hello! We have a QNAP with a LUN and we would like to connect to this device using iscsi so we can send all the backups to that storage. root@pbs:~# iscsiadm -m discovery -t st -p 192.168.65.3 -o update 192.168.65.3:3260,1 iqn.2004-04.com.qnap:es1686dc:iscsi.backup.4e4451.1 root@pbs:~#...
  6. D

    [TUTORIAL] Install PVE directly on iSCSI target

    When I see about adding the support for iSCSI install with the official ISO is actually not planned I searched some ideas to make this possible. I found a workaround with the official PVE 7.1 ISO and I want to share, maybe it can help someone. Only the iSCSI workaround will be explained, I...
  7. R

    [SOLVED] Grub can't find volume group 'pve' on iSCSI boot

    Hey, when I try to boot a freshly installed Proxmox 7 or Debian 11 I always get the error message volume group 'pve' not found. When I boot it with Qemu in a Debian live image PVE works fine. I guess there is something wrong with my installing process: 1. connect via iscsiadm 2. Start a vm...
  8. Y

    Drivers - iSCSI Boot

    Hi. We are planning transfer our internal resources in our company from VMWare to Proxmox(with subscription). Now we are testing your product and we have one problem: Servers was configured for VMware infrastructure without local disks. But i found solution - iSCSI boot. How i can integrate...