gpu accelerated transcoding

  1. P

    GPU Pass-through to Win-VM - Driver not loading

    Dear Community, I recently purchased a server to run some basic things in my home network. One thing on my bucket list was moving Plex Media Server from the NAS to a VM with more power. I installed ProxMox VE 8.2.2, running on ZFS RAID1 1TB NVMe SSDs. Hardware: AMD X570, Ryzen AM4 5950x, 64GB of...
  2. D

    Install iGPU Driver on host and container

    Hi, I just finished doing uid and gid mapping on a non-privileged container for gpu passthrough and the container boots fine. This container will run jellyfin and yes I know they say to use privileged containers but for security reasons I couldn't. I got to the point where it says to install the...
  3. J

    iGPU in LXC is "UNCLAIMED"

    Hi I have setup Proxmox on a recently built server. Rough specs are as follows: Motherboard: ASRock B550M Pro CPU: AMD Ryzen 7 5700G (the iGPU) GPU: NVIDIA 3050 Ti the output of lshw -c video is: *-display description: VGA compatible controller product: NVIDIA Corporation...
  4. A

    Configure GPU

    Bonjour, Je voudrais faire une accélération matérielle sur mon jellyfin qui se trouve sur une machine virtuelle Debian. Comment puis-je configurer le relais GPU pour que la VM ait un accès direct au GPU ?
  5. T

    Issues with AMD GPU setup for use with VAAPI encode/decoding in a LXC

    CPU: AMD Ryzen 7 5800X Motherboard: TUF GAMING B550-PLUS GPU: FXF 5700 I've been running into some errors while trying to get drivers setup for a Jellyfin LXC (privileged) I have. There's been a few problems which I cannot find a similar issue online to help me fix this with. Vainfo has been...
  6. G

    Proxmox VE 7.4 - Intel i3-10100, nVidia GT 1030 - How to use both gpus?

    Good Day! Excite bike! My rig is finally all put together and ready to go. Hardware Configuration: Asus Prime Z490-P motherboard Intel Core i3-10100 CPU nVidia GT 1030 GPU Here is the plan (well, the bits that pertain to my question): - Proxmox HV - - VM or container (TBD depending on which...
  7. M

    VirGL configuration with multiple GPUs

    Hey guys! I am currently having troubles distributing multiple VirGL VMs over two GPUs, mostly because I was unable to find any documentation for the tool. As per tests, VirGl is looking for a renderer in /dev/dri/ and uses it for the VM. After installing two cards (that are visible in lspci...
  8. G

    GPU passthrough Error: 43

    Hello, So I'm working to passthrough my GPU (Nvidia GTX1060 6gb Asus Strix) the machine uses dual Xeon E5-2609 cpus. I've followed this guide here https://www.reddit.com/r/homelab/comments/b5xpua/the_ultimate_beginners_guide_to_gpu_passthrough/ with some success but I'm still hitting Error 43...
  9. L

    AMD AMF encoding / transcoding HELP

    Hey, I'm looking for help on how to use AMF AMD encode with my Ryzen 5650GE in lxc Jellyfin. In the last few days I've felt like I've searched the entire internet for a solution. I found and tried the following: https://jellyfin.org/docs/general/administration/hardware-acceleration/...
  10. R

    Doubt about i5 12400 and transcoding

    Good to all, I am new to this forum and also using proxmox, in a few weeks or 1 month I will buy a new pc that I will use it as a server to install proxmox, I plan to host services like pihole, openvpn, jellyfin and more .... The hardware I'm going to buy is an intel i5 12400 with iGPU UHD 730...
  11. B

    [SOLVED] NVIDIA Driver 515.57 starting properly

    SOLVED: Reinstall the drivers from scratch and reboot after uninstalling from host and container before installing again. uname -r shows 5.15.53-1-pve Installing 515.57 drivers to GPU passthrough my GTX960 to a Plex container. I am following this guide on youtube...
  12. M

    Intel Nuc 10 GPU passthrough to LXC for Plex hardware transcoding

    Hi, I've configured the container as follows: arch: amd64 cores: 4 features: nesting=1 hostname: plex memory: 4096 net0: name=eth0,bridge=vmbr0,hwaddr=36:E6:21:5B:00:CE,ip=dhcp,type=veth onboot: 0 ostype: ubuntu rootfs: local-lvm:vm-103-disk-0,size=8G swap: 1024 lxc.cgroup2.devices.allow: c...
  13. B

    GPU Passthrough Pinning CPU core at 100% and using all RAM

    I'm setting up GPU passthrough for a VM, but when I boot the VM, it pins a core at 100% utilization and uses all RAM given to it when I specify the vbios file. I'm using a PowerColor Vega 56 Reading the GPU rom from the rom file and parsing it with https://github.com/awilliam/rom-parser shows...
  14. P

    nvidia container runtime in LXC container?

    I'd like to enable hardware-accelerated video transcoding via an Nvidia GPU card for an instance of Plex Media Server running inside PVE's flavor of LXC container. Has anyone been successful in enabling Nvidia GPU pass-through on Proxmox using nvidia-container-runtime? (LXC or KVM, doesn't...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!