Search results

Looking at your configuration, the port of the Unifi gateway, to where the physical port (enp3s0) of the server is connected, needs to be configured in trunk with at least VLAN2 - this is the VLAN configured on the CT. If Unifi port is in access mode, then you need to remove the VLAN tag from...

Can you show the network configuration of the CT in the PVE UI?

Hello, probably interface enp3s0 is connected to a switch? Is the switchport in access or in trunk mode? Can you show the configuration of the VM network? Are you able to ping 192.168.4.23 from the VM and vice versa? Regards

Looking at the code you pasted and comparing it with the tutorial, seems the 'HDDtemperature' item is different. Have you tried the original one? Disclaimer: I am not a coder, so if someone has more knowledge, do not hesitate;)

Hello, do you actually have /dev/sda as device? Can you show output of ls -ld /dev/sd*

I see ethtool says "Speed: 1000Mb/s" (suppose this is on the PVE server itself, not in VM), can you enforce it to 10000Mb/s? Something like " ethtool -s eno1 autoneg on speed 10000 duplex full". Keep in mind you may get disconnected from the server, so I suggest doing it via IPMI or direct...

Hi, enable multiqueue and try again (https://www.reddit.com/r/Proxmox/comments/w7ongm/10gb_to_vm/)

Hi, check 17.2.2 (https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_pveproxy_proxmox_ve_api_proxy_daemon) Hope this helps. Regards

Hello, to what kind of equipment is this server connected to? Can you check the port on the other end?

Hi, check this https://wiki.debian.org/NetworkInterfaceNames#CUSTOM_SCHEMES_USING_.LINK_FILES Disclaimer: It may cause other issues, if there is a hardcoded interface name somewhere.

Thanks, I checked and it's 32. I don't have that much now, but it's good to know for the future;) Regards

I was just curious about the option. From system administration point of view different untagged NICs in the VM are the best solution, but some commercial firewall vendors have (or used to have) limits in the number of "physical" interface, that's why I asked. Regards

Hello, multiple VLAN on the virtual NIC, but strict list of them. For example, physical NIC on the host has VLANS 10,11,12,13. I needed VLANs 10 and 11 passed to the virtual NIC in the VM, but not 12 and 13. "trunks" option to the interface does this, I was just wondering if this option can be...

Hello, I was looking at a way to pass two or more vlans to interface and I came across the "trunks" option to --netX flag. I don't see this configurable via UI, is there a plan to add it there? I don't mind cli, quite the opposite, but sometimes I have to give access to the UI to someone who...

I think found the cause, but I have no idea how to fix it or if it's working like this by design. When restarting the network, the bridge get recreated, but interfaces of the VMs are no longer members. When I change network device model, it gets (re)added. I am looking for way to add them via...

Hi, see this: https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0#Old_Container_and_CGroupv2

Got it, thanks.

Hi, I have a 3 node cluster with latest PVE7 no-subscription version. On each server two of the interfaces are in OVS bond, with 2 vlan interfaces on it, first is management (891), second is corosync (213). I have couple vms in third vlan 892 (it's not configured on the PVE itself, only on VMs)...

Hello, I just installed 3 node cluster, PVE 7.0-2. Each node has 2 drives, sda and sdb. On the first node, I created lvmthin pool called "pool-sas" on the sdb drive. When I tried to do the same on the other two nodes, I got an error for duplicate storage name. I ended deleting the storage via...

Hi, Turns out it was a wrong setup. Once I added cache and log devices to the SAS HDD pool, performance went through the roof. Marking the thread as solved. Thanks