Search results

  1. S

    [SOLVED] ZFS device fault for pool rpool on backup

    Thank you, I managed to replace the system hard drive with the guide you sent me. Best regards
  2. S

    [SOLVED] ZFS device fault for pool rpool on backup

    True, I had forgotten about the other one! :O Thank you Capture attached. They are SSD hard drives. They are the operating system disks.
  3. S

    [SOLVED] ZFS device fault for pool rpool on backup

    Hello, we have received this error message from one of the disks in the ZFS system. I have run a "zpool status -v name" and I don't see any error. Can I take any more action? Thanks, best regards. The number of I/O errors associated with a ZFS device exceeded acceptable levels. ZFS has marked...
  4. S

    Backup of PVE servers apart from VMs and containers

    Is there a way to not ask for the PBS server key so I can add it to the Crontab so I can do it scheduled? As with the shared key to access a Linux device via SSH.
  5. S

    Backup of PVE servers apart from VMs and containers

    No, PBS is on a separate physical server. Done thank you.
  6. S

    Backup of PVE servers apart from VMs and containers

    Hello, I already have the entire installation done with PBS and backing up the virtual machines and containers, but I have a question: Is it possible to back up the PVE servers themselves in PBS or separately? By GUI or Terminal ? Best regards.
  7. S

    PBS Raidz change hard drive with more capacity

    Hello, I have installed a PBS and configured three hard drives of 2Tb each, apart from the operating system for Datastore in Raidz mode. The idea is to replace these hard drives with larger ones, and our question is: Can I change disk by disk, expanding the size so as not to do it again and lose...
  8. S

    Proxmox backup ZFS is not compatible with disks backed by a hardware RAID controller.

    Hi, That was it, these albums were previously on a Nas and that's why they had a Raid format, what a mistake. Thank you
  9. S

    Proxmox backup ZFS is not compatible with disks backed by a hardware RAID controller.

    Hello, On an Asus rs300-e6/ps2 server we have installed the Proxmox Backup operating system on two hard drives in ZFS Raid 1 format. To do this, we deactivate the Raid mode of the controller in the Bios, so far so good. Once started, we have three other hard drives that we want to use for...
  10. S

    Proxmox 6.4-4 NFS server on container

    Hello, we have an issue with a container on Proxmox 6.4-4. This container has a nfs server (is a PXE server) was working fine on Proxmox 5.4. We add the option "lxc.aa_profile: unconfined" to the container configuration but with the update it does not work. The container shows a warning...
  11. S

    Proxmox 6.4.4 containers stop working

    Oct 27 12:35:44 proxmox2 kernel: [442652.586881] vmbr0: port 5(veth103i0) entered disabled state
  12. S

    Joining the cluster creates another local disk-zfs2

    Hello, I have a node with two hard drives in ZFS in Raid 1 (local-zfs), when joining a second Node to the Cluster with a hard drive in ZFS in single mode raid 0 (local-zfs), it will create me in this second node another disk with local-zfs2. Before I had another node like the first well...
  13. S

    Proxmox 6.4.4 containers stop working

    We have upgraded to Proxmox 6 from 5.4, we have several containers that were working fine, but there are two that after starting and running for a few minutes, they are no longer accessible and working. These notices appear in /var/log/kern.log: Oct 25 15:54:08 proxmox2 kernel: [281766.212672]...
  14. S

    [SOLVED] zfs problem: /sbin/zpool: undefined symbol: thread_init

    Hello, before the mistake, a colleague made: apt-get install zfsutils-linux apt-get install zfs-initramfs I oponend this case: https://forum.proxmox.com/threads/could-not-activate-storage-local-zfs-zfs-error-zpool-symbol-lookup-error-zpool-undefined-symbol-zpool_get_prop_literal-500.97389/...
  15. S

    [SOLVED] zfs problem: /sbin/zpool: undefined symbol: thread_init

    Hello I think I have the same error as in this matter, can you confirm me? could not activate storage 'local-zfs', zfs error: zpool: symbol lookup error: zpool: undefined symbol: zpool_get_prop_literal (500) Thanks
  16. S

    could not activate storage 'local-zfs', zfs error: zpool: symbol lookup error: zpool: undefined symbol: zpool_get_prop_literal (500)

    Hello, We have two nodes that have started to fail when replicating They used to work fine. command '/usr/bin/ssh -e none -o 'BatchMode=yes' -o 'HostKeyAlias=proxmox2' root@10.1.0.241 -- pvesr prepare-local-job 109-0 local-zfs:subvol-109-disk-0 --last_sync 0 --parent_snapname Limpio' failed...
  17. S

    How to add disk format subvol?

    Hello, I got it with the following conmands: vzdump 302 -storage NAMESTORAGE cd /mnt/nuevodisco/dump/ scp vzdump-lxc-302-2018_12_14-11_38_54.tar root@192.168.0.X:/mnt/nuevodisco/dump pct restore 902 vzdump-lxc-302-2018_12_14-11_38_54.tar -storage NAMESTORAGE How can I do it with VM? Best...
  18. S

    How to add disk format subvol?

    Hello, I is copy Contain of a ProxMox to other. No work the comand: vzrestore vzdump-lxc-101-2018_01_20-12_00_03.tar.lzo 102 vzrestore: command not found proxomox Can you help my? Thanks you, best regards.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!