Search results

@Neobin, thanks for the clarification, I don't use this mode much as it is unsafe anyway, but I was wondering how the pool knows if I create a pool with one disk, and then add one when this is let's say half full, to properly stripe over 2 disks? I created a pool once with only one disk and...

You can use mount points for single-host directly accessing CT/VMs so no samba/nfs is necessary, but you can also do that if needed. I would not be so sure that if one of the disks in JBOD volume fails you will still be able to access any of the data in that pool. I can try to emulate this but...

Hi, I have a "similar setup' but I took it up for a notch. I created a 2 node PVE cluster with only 256G NVME's where I run all the services you mentioned + dns, dhcp (pihole). I added RPI as a corosync device to have a total of 3 cluster nodes which is needed if one of PVE nodes fails . I Also...

I have 5 nodes PVE cluster (PVE8.0.4) created from some dated hardware, it consists of: 2 nodes with 1x E5-2640 v3 cpu 96G ram, 2x 320g SAS disk sin R1 for the system 2x 8T SAS for CEPH 1 node with 2x E5-2640 v2 cpu 64G ram, 2x512g SATA disks in RZ1 for the system and 2x 8T SATA for ceph + 512G...

@fiona unmounting is off the table as it is user based local mount and forcing it could create problems. I put all the possibilities and now it looks like one of those was the right one and ignores that file/folder so working now!

@dcsapak I have put my .pxarexclude on the root folder eg / and scratch is on root. Documentation in this regard is bit confusing as reports from the forum say to ditch the trailing / .... @fiona This seems to be a problem as the system sees this file : d????????? ? ? ? ...

Hi, I am trying to backup one of the desktops (ubuntu 22.04) I am hitting this error and backup fails Error: error at "xxx": stat failed on "xxx/encrypted": EACCES: Permission denied that folder is encfs encrypted folder thus root has no access to it. I tried adding exclusion in .pxarexclude...

Hi Stoiko, Thanks for coming back to me. Yes, I used pmgcm delete as you suggested. And then upgraded the main node and reinstalled the second and rejoined it after. I tried couple of times but the error always came up After that, I think I resolved the issue by deleting data from two tables...

I have this weird error in sync which I see on my Master node : pmgmirror[414]:database sync 'node-2' failed - DBD::Pg::st execute failed: ERROR: duplicate key value violates unique constraint "cmailstore_pkey"#012DETAIL: Key (cid, rid)=(2, 70691) already exists. at...

Ah I was adding : at the end by the looks of it and I figured it out now thanks!

Thanks for your reply but I still get: Parameter verification failed. (400) field value does not match the regex pattern if I put to field name Subject: lets say ...

I am trying to create regex to filter certain words in Subject line, so I created a What object Field: Subject: Valie: \W*((?i)wordtofilter(?-i))\W* but it does not accept it ? it only accepts if I put worldtofilter in field line, what am I doing wrong? Thanks

I have exact same issue, I want to select kernel which works with my environment, and it select wrong kernel I want to set default to old kernel but it does not happen, and I can't remove latest one too as it wants to remove more then just the latest kernel I have two options in my boot loader...

Thanks Fabian, After inspection nothing seemed to be wrong in EFI partitions, after that I cleaned all the kernels out of the way with apt-get remove --purge pve-kernel*=ver*, system still boots with copied initrd image, after that I tried to install 5.3.18-1-pve from repo and it is still...

By properly frustrating myself with this, I installed a second proxmox instance in a vm, and copied over initrd image (initrd.img-5.3.18-2-pve), went through usual step copying image with pve-efiboot-tool refresh and system booted afterwards. When I had live system back again I extracted both...

Hi Fabian, Stoiko, I am still going in circles, I can mount from debug mode but that is about it, all that you suggested did not work, the output of update-initramfs -u is as it should be and not reporting any errors, google doesn't say much about this and usual trick ( yours and picked up from...

I did lsinitramfs and it looks ok, at least "init" is in root folder there, I actuall don't know what I should be looking at ...

Will do that later as I haven't got access to the machine now. It is a UEFI based boot, as I can see new options when I add kernels but when I generate new ones with update-initramfs -k all -u and after I run pve-efiboot-tool refresh it finishes without any errors. After the machine restart, it...

I have now tried to install an older kernel from the repository but I just can't make the system boot, it always goes to /init problem, looks like some sort of fs problem as it regenerates the image but always something is just not right .... I am really getting frustrated with this...

So I booted in debug mode zfs import rpool -R /mnt -f mount -t proc /proc /mnt/proc mount --rbind /dev /mnt/dev mount --rbind /sys /mnt/sys chroot /mnt /bin/bash # Chroot into Proxmox ran pve-efiboot-tool refresh and still same thing ? Am I missing something ?