Search results

Hello, confirmed. Tagged interfaces work only after restarting network stack. While playing around with it, I found out the following so far: eth0 untagged, no bridge: works. eth0 in bridge: works. eth0.x used without bridge: works eth0.x used in bridge: sends packet _untagged_...

then you are either routing inside the VM, so the two host-bridges are not connected and thus no STP needed. Or you are bridging which would connect the host-bridges, but still: inside the VM. So the VM would have to take care of STP or any other means of loop prevention if neccessary, not the...

Question of philosophy.. I'd say: Someone who adds a bridge with STP enabled to his network and has no idea what that does to his network should not be called admin. :) But there is easy logic behind it: One physical interface: no STP. More than one physical interface (not counting bonding)...

Hello Dietmar, I think that is because the physical interface (eg peth0) is not used anymore for connectivity. Instead the vifs are used. If I understand the docs (and some posts in their mailing list) correctly, they copy the physical MAC to the vif and invalidate the peths with this trick...

Well, that's not quite true. Then you would need STP always, when you connect two or more switches (which in themselves are a bunch of bridges). But as long as you make sure that you will never form a loop, you do not need STP at all. Say.. you take three switches and connect them in a flat row...

Hello, I noticed that with beta2 you enabled STP on the bridges per default. Since 'till now Linux is only capable of doing standard spanning tree, could we please have that as an option to turn off again? Depending on the switch, if they see a legacy STP-BPDU on a port, they fall back to...

<mode="homer simpson"> Doh! </mode> ;-) Ok, I tried to do it the other way around. First create the Interface (that's where I got stuck), then add it to the bridge. Thank you! Regards, Marc

Hello, I'm sure I'm just too blind to see: Where/How do I configure VLANs in the WebUI with beta2? Thanks a lot in advance. Regards, Marc

I get that here, too. Upgrading holds back pve-manager, because it depends on package vlan which for some reason is tagged virtual with no install candidate. Might be a temporary issue, since no one else noticed that. I downloaded the vlan package directly from debians servers, installed it...

has to be an issue in one of the surrounding libraries. Reinstalled: not able to shut down. Gave up after 10mins. no Qemu VM running.(!) did an update of the base system ("apt-get dist-upgrade"), apparently nothing PVE specific was installed, but now everything is as it should be. When there is...

Hello, when I try to reboot ot shutdown the Proxmox VE it starts shutting down, prints: "shutting down Qemu server" and then just sits there forever. Since this is just a test installation, I reinstalled, did nothing in the WebUI, just logged into the console, tried to reboot, same as above...

Hello, first of all I have to say that I am very impressed from what I saw of the Proxmox VE so far. If this is going to evolve as quickly in the future, we will see a very interesting product soon. But now to my problem: I cannot attach a console to running vz containers. From the WebUI i...