Jeep, hatte unmittelbar auf allen 3 Knoten die /etc/hosts und die /etc/network/interfaces entsprechend angepasst und danach erst die "alte" /etc/pve/corosync.conf mit der modifizierten Version überschrieben.
Ich bin jetzt todesverachtend hingegangen und habe den 3ten Knoten ebenfalls...
Den Eintrag habe ich auf der Seite auch gesehen.
Ist die Reihenfolge (s. u.a. Eintrag der /etc/hosts) relevant?
Ich kann jedenfalls mit dem angegebenen Eintrag ohne Schwierigkeiten eine ssh-Verbindung zwischen den beiden Hosts aufbauen.
lt. corosync.conf: ring0_addr: coro-pvecl01
Zeile in der...
Hi,
nach dem Versuch die Kommunikation auf meinem 3er-Cluster gemäß der Beschreibung
https://pve.proxmox.com/wiki/Separate_Cluster_Network
in der einfacheren Variante OHNE "redundant ring protocol" aufzusetzen, steht alles.
Nachfolgend die durchgeführten Schritte:
/etc/pve/corosync.conf.new...
Jeep, that was helpful. Thought "-c" had to be set to share the storage with the other nodes.
So it's "just":
- Baseinstallation
- Install multipath to recognize the SAN-Volumes on all nodes (apt-get install multipath-tools)
- setup the Cluster
pvecm create .....
pvecm add .....)
- Setup...
Training was held by an official Partner. Exhibition accompanied by some Proxmox-Guys in Germany.
Back to Topic.
Deleted the logical volume.
Disabled services for dlm and lvm2-cluster-activation.
Enabled lvm-activation service.
Unloadel modul dlm.
Changed locking_type in /etc/lvm/lvm.conf...
Hatte ja auch "versucht" meine Lösung in beiden Sprachen zu kommunizieren (anderer Stelle trat schon "Unmut" mit dem Hinweis auf, dass es extra ein deutsches Forum gibt, wo man doch von allen im IT-Umfeld arbeitenden Werktätigen englische Sprachfertigkeiten erwarten könne ... ;-)
Dem stimme ich...
Thank you for the hints. I'll try to attach the shared SAN without the additional Stuff just via the Web-GUI.
The above mentioned Setup came up because I received the Answer twice, during a Training and a Exhibition that SAN wouldn't be supported. The use of CEPH woud be prefered..... Although...
Danke für die Hinweise. werde also versuchen die SAN-Anbindung ohne die zusätzlichen o.a. Schritte über die Web-GUI zu realisieren.
Die eingangs erwähnte Einrichtung hat Ihren Ursprung im Umstand, dass ich in einem Training und auch auf Nachfrage auf einer Messe die Aussage erhielt, SAN würde...
So the only thing is to setup the Physicalvolume, Volumegroup and Logicalvolume for the SAN-Volume on one of the nodes and then just add it as LVM Storage in the Web-GUI?
Weshalb nicht? ;-)
Spaß beiseite. In der Dokumentation zu Proxmox habe ich wenig zu Möglichkeiten hinsichtlich der direkten Anbindung von SAN-Speicher gefunden. Da meine Knoten wenig lokalen, dafür aber ausreichend SAN-Speicher haben, wollte ich diesen als "shared Storage" im Sinne von zentralem...
Kurze Info zu meiner Umgebung vorab.
Ich nutze aktuell keine HA-Features für die auf den Knoten laufenden VMs.
Meine Zielsetzung war lediglich ein gemeinsames Volume auf einem vorhandenen SAN zu nutzen, wobei die Migration (online und offline) manuell durchgeführt werden sollte.
Mit den...
Just some brief Information concerning my environmental needs before.
I don't use the HA-Features for VMs running on the nodes.
My goal was just having a shared SAN-Volume to perform manual migration (online and offline).
I performed the following steps to get my 3-Node-Cluster up and running...
Yes, already bought 2 Commercial Support Subscriptions, additional 3 are on their way through the buying department, further extension already planned.
I already use a local mirror (package apt-mirror) for Debian, Ubuntu,..
Hi,
to avoid downloads for every single clusternode is it possible to mirror enterprise repository on local site after subscription?
If this is the case, how to?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.