Search results

I can confirm that this was my problem. I rebooted using a PartedMagic CD, stopped the mdraid and then zeroing all the superblocks. mdadm -E /dev/md0 mdadm --zero-superblock /dev/sda2 mdadm --zero-superblock /dev/sdb2 mdadm --zero-superblock /dev/sdc2 mdadm --zero-superblock /dev/sdd2 After I...

Thanks for your input as well Birger. I will read up on Ceph and see if that cloud be an alternative. /Bjørn Håkon

Thanks for the quick reply. Then I'll go for that solution. How about file system? ZFS raid1 or zfs raid10 on proxmox? Reading on Storage Model i the wiki, is it best to use "ZFS over iSCSI" or "LVM Groups with Network Backing" in my case? Thanks again.

I need some recommendations regarding a new setup. I have 3 servers/PCs: Server 1 Server 2 Server 3 CPU i7 2600K Xeon E5310 i5 750 RAM 16 GB 8 GB 16 GB DISK 4 x 2 TB 128 GB SSD 2 x 2 TB 1 x 1 TB 8 x 2 TB 256 GB SSD NETWORK 2 x Gbps 2 x Gbps 1 x Gbps Before the just released...

Sure Wolfgang MB: ASUS P8Z68-v pro/gen3 CPU: INTEL CORE I7 2600K RAM: 16GB Disks: 2x Hitachi HDS722020ALA330 and 2x ST2000DM001-1CH164 The disks are all connected to the four 3Gb/s ports on the motherboard. SSD: Corsair Fource GT - connected to one of the 6Gb/s ports. The SATA config in the...

Thanks for the reply, nice to know it is not just me :p My disks is connected to the integrated controller (Z68) on a ASUS P8Z68-v pro/gen3 motherboard. I'm also planing to use my SSD as ARC2.

Hi Tried to install Proxmox 4 today on a machine with 4 2TB disks (+ one SSD). I selected Raid10 as file system type and selected my four drives. When the machine reboots, I see the following after the GRUB menu: Loading, please wait... Command: /sbin/zpool import -N rpool Message: cannot...