Thanks for sharing,
I forgot to add the following lines to /etc/apt/sources.list
# PVE pve-no-subscription repository provided by proxmox.com,
# NOT recommended for production use
deb http://download.proxmox.com/debian/pve stretch pve-no-subscription
afterwards worked fine on hp server with...
I found an ugly workaround
I was able to diagnose a bit further,
The test server has only 1 kvm windows 2008 server vm.
If you issue an:
qm stop vmid
then reboot works fine!,
However if I issue a
qm shutdown vmid
The server hangs and cannot reboot/shutdown
Looks like the shutdown sends...
I think Im running the latest on the no-subscription REPO(4.15.17-1-pve). could you share your kernel version?
proxmox-ve: 5.2-2 (running kernel: 4.15.17-1-pve)
pve-manager: 5.2-1 (running version: 5.2-1/0fcd7879)
pve-kernel-4.15: 5.2-1
pve-kernel-4.15.17-1-pve: 4.15.17-9
corosync: 2.4.2-pve5...
Provisioned a Twin server like this one hp-proliant dl160 g8
and the problem did not went away,
It started after running Windows KVM Virtual Machines on the server with windows 2008 server r2 or windows 2016 server
So this solution is not the correct one,
Changed the setting for...
Wanted to share our findings on this issue.
In our case a HP DL160 G8 - With a p420 Raid Card.
The last message displayed was watchdog did not stop
It was the shutdown of the raidcard that caused the hang,
We had to:
1 update the p420 firmware to 8.x
2 destroy the array that was on the disks...
This is a question :
Is this the correct way to a update a non subscription server to protect against the Vulns:
1)Enable test repo adding the following line to /etc/apt/source.list
deb http://download.proxmox.com/debian/pve stretch pvetest
2)Issue the following commands on the console:
apt...
Re: Trying to restore pve group QUESTION?
Hi I can now see the light,
I found at this directory :/etc/lvm/archive
Files that seem to be backups of the lvm configurations before any changes were made,
There is also a /etc/lvm/backup where i can see previous configurations
Now i have to...
Trying to restore pve group QUESTION?
I found out that the main disk exists but is marked as NEW Physical volume
If i recreate the pve group and add the volume to it
---WHAT WILL happen with the /dev/sda2 info is it safe to do so?
lorena:~# pvdisplay -v /dev/sda2
Using physical...
HI,
I found the following tools to try to fix this issue
vgcfgbackup vgck vgdisplay vgimport vgmknodes vgrename vgsplit
vgcfgrestore vgconvert vgexport vgimportclone vgreduce vgs
vgchange vgcreate vgextend vgmerge vgremove vgscan
is it safe to run...
HI thanks for following Ive been reading the forum searching for a similar issue,
I think the device with uuid Mpzpul- was not correctly destroyed or removed(i had a mixed concept trying to format the device)
--it was somehow added incorrectly to the pve group (first post) and corrupted the...
Thanks for you prompt response, I was able to add a new group (by reading the wiki) and added the secondary hard drive storage as another lvm group,
However when i go to the UI and clic on New lvm group I get an ugly perl error
+++++++
[9069]ERR: 24: Error in Perl code: command '/sbin/vgs...
Hi,
I recently added a second sata (first is also sata) hard drive to our proxmox running kernel 2.6.18-2-pve #1 SMP.
version:
pve-manager/1.5/4674
Created new partitions on sdb and tried to add lvm group , however vgdisplay now shows a problem:
vgdisplay
Couldn't find device with uuid...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.