OK, but... I do "the thing" and then problem is solved :confused:.
Some is wrong with the time control at baremetal?
My PVE catch the ntp information from internet and the date time set is OK at PVE OS; but, if I add a Windows Server 2k8r2 machine (VM) and I set "os type" as Linux the clock...
we are evaluating migrate to another platform for this...
Same problem, SAS disks (but RAID 10) and same server.
After 50% of recovery task the IO delay goes up! and other times for other backups goes well (less big but not significantly).
When recover VM at another storage like same "BackUp"...
A little detail about USB installation.
When you use a USB Stick (or USB HDD) this error appears... and the last line says "no cdrom found - unable to continue"
Googling this words, I found a some "additional" steps to installer starts correctly.
The steps basically consist in:
1-Identify...
I solved the problem.
I was trying to install PVE 3.3 on 1+0 RAID based on 6 SAS disks @ 900GB
The total available storage in this schema is 2,7T
When I try to install PVE on a 0 RAID with just two of those disks the installations goes well. The available disk space at this schema is less than...
Hi ekedir, I have the same problem with PVE 3.3
I'm trying to install it from external USB hdd, and I have the message:
Installation failed! unable to partition harddisk /dev/sda
Did you solved the problem?
Mother of God !
I have the same problem installing PVE 3.3 on mi HP Porliant DL380 g8 using P420i and installing from USB Stick.
Any idea to solve this?
Yes it has...
I used both ORCA (BIOS utility) and ACU (Array COnfiguration Utility)
I think that installing PVE 3.2 or 3.1, then upgrading to 3.3 may result.... but if you says that you used 3.3 installer.......
the things that may be simple, always go complicated...
This problem looks like HP...
I'm back with other question related:
¿do you remember what RAID configurations parameters must be setted in Advance Configuration for install PVE?
The parameters are:
Fault Tolerance
Strip Size
Sectors/Track
Size, Caching
And Parity Initialization Method
I used ACU, as this tutorial shows: http://goo.gl/luYD6C
Browsing web I found others methods, like using ORCA utility, but I didn't try yet.
At BIOS setup utility, i did not find P420i RAID controller configurations menu.
Can you specify me what method do you use for setup p420i RAIDs before...
When you says "did you setup your raid first through raid bios/software", the <<"first">> word (before "...through...") makes reference to another configuration needed after ACU set up?
Are there some BIOS sata / raid configuration that I have to check? [(bios, not ACU)]
The verbose mode looks...
Hi! I have configured my RAID using ACU (Array Configuration Utility). I created a RAID 1 + 0 and RAID 0.
Then, when I boot the installer (USB), PVE Installer only searches the integrated SATA channels but not the RAID controller.
Hi! was the problem solved for you??! Im starting with PVE and I have some troubles to install PVE 3.3 on HP Proliant DL380 G8 with P420i (Embedded) RAID Controller.
The installer boots but when it scan for disks it can not found my RAID disks.
¿Any Ideas?
Hola, el problema se solucionó? Estoy...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.