Search results

Hi all I know the post is pretty old but I can't found the right working solution anywhere, so I decide to write it here: The X3300M4 have 4 NIC onboard : 2 are enabled by default and 2 are enabled with FoD (additional license) According to this document (pag 12) the default configuration say...

Find it... pvesh create /cluster/backup -starttime 23:30 -all 1 -compress lzo -dow mon,tue,wed,thu,fri,sat,sun -mailto paolo.tezza@gmail.com -mode snapshot -quiet 1 -storage Verbatim Let's script it all and let's see what's happen this night

ok... I think I'm doing it in the right way but I need help now I "mount/umount" the NFS NAS share using pvesh command pvesh create /storage -storage Verbatim -type nfs -export /mnt/ide1/backup -server 192.168.0.249 -path /mnt/pve/Verbatim -options vers=3 -content backup pvesh delete...

Don't worry for your persistent... I'm here just to ask what could be the best practices (and if it could be possible) I say what I like to do, but it could be different from what really I will do!! :) I'd like to try to schedule the mount / umount of the NAS using Crontab, and I like to know...

Hi You got the point! I wanna simulate tape backup and I've already done on other system (not proxmox) using USB disks and rsync The NAS I'm using are really small, and really similar by dimensions to USB disks.. and also cheapest than tape device...

Hi all I would like to know if it is possible and wich is the best practices to perform a backup on 2 "rotating" NFS drive Scenario: -One disk is attached to the network for one week to perform daily backup -The other one is in safe place -Once a week the customer swap the disks I bought 2...

I think the problem can be solved now IpCop 2.0 was released just 2 days ago http://ipcop.org/download.php It is based on 2.6 kernel branch bye

Hi all, is it possible to assign some kind of autostart priority? I have one KVM Firewall, with DHCP, DNS services, and other VM doesn't work well if this one isn't still completely available. Thanks for great work Pak

You're right :) my explanation was incomplete... here all the examples http://httpd.apache.org/docs/2.0/vhosts/examples.html

I think is possible to block external web connection in 2 ways: -- APACHE -- HOPE SOMEONE CONFIRM WHAT I'LL WROTE I'm not Apache guru Edit /etc/apache2/sites-enabled/pve.conf Replace <VirtualHost *:80> and <VirtualHost *:443> with <VirtualHost YOURLANIP:80> and <VirtualHost YOURLANIP:443> Then...

Because I configure the vmbr0 as WAN interface and vmbr2 as LAN I configure in this way because i can use the proxmox gateway... Am I wrong? I attach a network schema... let me know if you think there is some errors As you can see, the proxmox physical interface is between the router and the...

You're right, I have 8 public IPs and I've done exactly as you say... The only way I found to "not publish" the Proxmox server interface in internet was to change the apache configuration In the past I used vmware server (1.0 and 2.0) and in those server was possibile to bridge a virtual nic...

I seize the moment... I did this configuration because I haven't find out how to set the public IP only in the virtual firewall, without setting another valid IP in the Proxmox physical interface... did I miss something?

This is correct for the moment... I'll change apache config when everything will be ok Anyway I hide the IP in the ifconfig Thank you so much

Almost sure that are driver issues...but I changed nothing in the VM setup during the upgrade. I'm trying to change the virtual NIC (virtio, ne2k, pcnet...) after the issues, but the only one that works a little bit are rtl8139 and e1000 I know IpCop is little bit old (still using 2.4 kernel)...

Hi all I would thank you for Proxmox: it is really great I have a little issue: after upgrading from 1.8 to 1.9 my virtual firewall (IpCop) stop working well; it means if I reboot it, it works for 10 minutes then the network connection go down In my IpCop the log is Sep 13 20:15:15 ipcop...

I added the disk manually in the /etc/qemu-server/300.conf and now I can see it in the web interface too The machine doesn't boot, but this is another issue :) maybe something wrong about conversion (it is my first converse experience with ProxMox/kvm/qemu, so I think it's normal something goes...

debborah:~# pveversion -v pve-manager: 1.5-10 (pve-manager/1.5/4822) running kernel: 2.6.32-2-pve proxmox-ve-2.6.32: 1.5-7 pve-kernel-2.6.32-2-pve: 2.6.32-7 qemu-server: 1.1-16 pve-firmware: 1.0-5 libpve-storage-perl: 1.0-13 vncterm: 0.9-2 vzctl: 3.0.23-1pve11 vzdump: 1.2-5 vzprocps...

I rebooted the server debborah:~# ls /var/lib/vz/images/300/ -l totale 548 -rw------- 1 root root 8684 29 giu 18:18 SME_1.nvram -rw-r--r-- 1 root root 196608 6 lug 17:39 SME_1.qcow2 -rw------- 1 root root 467 29 giu 19:11 SME_1.vmdk -rw------- 1 root root 0 29 giu 18:18 SME_1.vmsd...

Thanks for very fast reply this video show how to add a NEW virtual disk. This features works greatly. What I can't do, is to add one disk previously created (no matter the format)