Search results

Ahh.. that makes sense now.. because my pmg was forwarding that email, my postfix couldn't properly verify it as it thought it was coming from it and not MS... Once I added my pmg to my postfix mynetworks field it accepted the emails from 365 perfectly, without the whitelisted networks above...

Thanks for the response. Unfortunately, the above did not work for me. It's still rejecting the email. Here is one of the logs, (email address have been redacted) Dec 4 17:35:49 mailwash postfix/smtpd[4945]: connect from...

Hello, I'm running a postfix email server at home and I've deployed the Proxmox Mail gateway. Running 7.2-2. If I send emails from hotmail or gmail my emails will get through proxmox. I've found out that if emails are sent from domains hosted on M365, proxmox will reject the message saying...

Ok so I tested the new Virtual NIC with automatic Settings, to my laptop hardwired in, and did the iperf test, and it shows 1.09Gbytes Transfer and 936MBits/sec Bandwidth on both the host and guest. So I tried from the guest to my NAS, adjusted the MTU on the NAS to 1500 and plugged it back in...

This is the output when I do Gust to Host, the second picture is Host to Guest.

Here is a screen shot of my two Iperf the top one is from the host to my Qnap NAS, and the second one with the lower speeds, is my Cent OS 7 Guest. I have double checked my MTU settings. The Bridge for my .9 network has a MTU of 9000, my guest VM has an MTU of 9000 and the Ethernet port...

Hello, I'm running Proxmox VE 5.0-23/af4267bf the host hardware specs are: -HP Proliant D380 G6, with 2 Intel Xeon X5570 (2 Sockets 8 core each) -Four gigabit NICs. -16 GB of RAM - Five 4TB HD's setup in a RAID 5 to get 16TB of space. I have Vmbr0 which is the main LAN connection going...

Hello, I'm running VE 4.4-1/eb2d6f1e and I've found that I can't take a snapshot of one of my VMs. I've found the reason and it's because I'm passing through a Hard Drive. If I turn off the VM and remove the pass through I can make a snapshot then would have to add the hardware back into...

Well I figured it out. When I cloned the VM, I was passing through a HD to it, and apparently when I removed that pass through entry from the config I was able to clone the machine

Hello, I'm running Proxmox VE 4.4-1, with two 5TB set up as a ZFS Mirror Array. I have one Vm that has two Virtual Hard drives. I did a bone headed move by creating a template out of one of my VM's not knowing it would render my VM useless. Upon my research it says I can just Clone the...