Search results

i have this problem too with freebsd kvm guest...machines use 100%cpu or hang at boot

Hi, I have a problem with kvm guests on Freebsd 9.1 and 9.2 . When i use kvm on freebsd 9.1/9.2 server guest hang up kinda 5-10 minutes with 100 using cpu. I tried all cpu ,but same error. Tried to use virtio, same thing. What to do?

auto vmbr1 iface vmbr1 inet static address 172.16.16.1 netmask 255.255.255.0 bridge_ports eth1 bridge_stp off bridge_fd 0 Had same problem a year ago, and bridging with eth1 worked. Try this setting for vmbr1 > bridge_ports eth1

Same : eth1 down, if i asign ip-range from vmbr3 to any vm i cannot acces that vm (i am behind router with my workstations). # PCI device 0x13f0:0x0200 (sundance) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:26:18:d9:5d:84", ATTR{dev_id}=="0x0", ATTR{type}=="1"...

Hello! This is my 4th lan description , with proxmox active. 1 server > router > workstations my interfaces : # network interface settingsauto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto eth1 iface eth1 inet manual auto vmbr0 iface vmbr0 inet static address...

hello Udo, I cant ping from outside the CT,only on lan. [root@cp ~]# ping google.com PING google.com (173.194.39.105) 56(84) bytes of data. 161 packets transmitted, 0 received, 100% packet loss, time 160006ms Then stay blocked few minutes . CT is openvz based, ip installed via web..then...

Shows nothing, after 5 minutes i do ctrl+C and write this : 0 packets captured 3 packets received by filter 0 packets dropped by kernel After 10 minutes : 19:38:30.232136 ARP, Request who-has the-new-ip tell myip, length 46 19:38:30.287916 ARP, Reply the new ip is-at 00:26:18:d9:5d:84 (oui...

traceroute to google.com (173.194.39.101), 30 hops max, 40 byte packets 1 host (xxxxxxxxxx) 0.040 ms 0.027 ms 0.022 ms 2 213.154.137.61 (213.154.137.61) 0.716 ms 0.710 ms 0.728 ms 3 bb01.valcea.rdsnet.ro (213.154.137.133) 1.391 ms 1.511 ms 1.510 ms 4 * cr01.bucuresti.rdsnet.ro...

Hello! I have proxmox 3.1 and yesterday i added a new ip to my centos CT and i saw that doesnt work. I tested ip on other CT and doesnt work too. Then I added another ip to same CT and worked. How to manage that ip to work? Locally i can acces the ip,but externally i cant acces. Can u help...

Hi Udo, Problem solved. I rebuilded network configuration on host and disabled iptables, then i added ip from putty with command : vzctl set xxx(container number) --ipadd xxxxxxx(ip add) --save I think , the problem is from iptables because i have an old-old-old version and i dont know how to...

Hello! Yesterday my CT with WHM suddenly failed. Now Dns port 53 is blocked, i disabled all iptables rules but isn't working. I can acces CT via local network, and ping other external sites inside of CT. Can u help me how to resolve this problem?

Hi,Udo! It's working now :D. I created a bridge with my eth1 , and on bridge i puted the 1st ip from subnet and on kvm i used one of subnet ip and i selected the e1000 nic. Can i use e1000 nic on freebsd? Or what nic you recomand me? Thank you a lot, u saved my pocket to spend on another router :D

Hi, Udo! ISP recomanded me to buy an router that suport NAT disable and then my network will work. This router Router TP-LINK TL-R480T+ is good for doing this? I readed specification but i dont saw any disable/enable NAT , but i saw that he can suport 2 wans.. what u recomend me to do? Thank...

hi udo, my server dont work on internet . if i bridge one eth0 or eth1 then my internet is gone. i use following interfaces for internet but doesnt work on my vm server # network interface settings auto lo iface lo inet loopback auto eth0 iface eth0 inet static address...

no one can help?

Hello! I a have a problem with proxmox ve 2.3 So here's what i want to do : i have 2 network cards and i want to use one directly connected on my isp network with this ip eth0 81.196.124.123 ,netmask 255.255.255.240 , gw 81.196.124.113 and my second network card i want to use for share...