Search results

OK. I installed an older wd2500ks 250GB sata drive internally and the results are a bit slow, but I am fairly certain that my old backup drive or caddy is going bad. CPU BOGOMIPS: 42558.71 REGEX/SECOND: 966191 HD SIZE: 229.23 GB (/dev/sdd1) BUFFERED READS: 58.00 MB/sec...

There was nothing accessing the disk during these tests. Here are the logs after mounting... Jul 21 14:39:46 proxmox kernel: XFS mounting filesystem sdc4 Jul 21 14:39:56 proxmox kernel: ata1: hard resetting link Jul 21 14:39:56 proxmox kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl...

Here is the quick answer running pveperf on the backup drive mounted as /mnt/backup. I ran it three times back to back to show the variation. I will have to figure out how to run bonnie++ for the other part. proxmox:~# pveperf /mnt/backup/ CPU BOGOMIPS: 42558.71 REGEX/SECOND: 965905...

I am running Proxmox v1.8 on my Supermicro x8sax. The system boots off an Intel RAID controller and the Virtual Machines are on an LSI logic SATA RAID controller. These are working fine. My problem is a Seagate 500GB SATA drive that I have plugged into one of the onboard ICH10 SATA ports. I...

The new kernel is working for me as well. When will this update make it into the repository, or has it already? Thanks for the great support!

Below is my /etc/fstab file. As you can see I am using disk labels to identify my drives so which drive is assigned sda or sdb doesn't matter. proxmox:~# cat /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> /dev/pve/root / ext3 errors=remount-ro 0 1 /dev/pve/data...

I don't understand why this would help. It seems to me that the modules are already loaded but the system isn't activating the lvm's. Is LVM running before the Intel SCSI controller module is loaded?

proxmox:~# pveversion -v pve-manager: 1.6-2 (pve-manager/1.6/5087) running kernel: 2.6.24-12-pve proxmox-ve-2.6.24: 1.5-24 pve-kernel-2.6.24-12-pve: 2.6.24-24 qemu-server: 1.1-18 pve-firmware: 1.0-7 libpve-storage-perl: 1.0-13 vncterm: 0.9-2 vzctl: 3.0.24-1pve4 vzdump: 1.2-7 vzprocps...

When I upgraded to the 2.6.32 kernel it uninstalled the 2.6.24 so I had no other kernel to choose at boot. I removed the LSI MegaRaid card and booted with only the Intel SCSI Raid card and it still didn't work; so I don't know what that means about the two controller theory because the...

Well, I got mine back up and running by downgrading to the 2.6.24 kernel. Here is what I did... Boot up using a Debian Lenny network install CD Select Advanced > Rescue mode at the boot prompt The system will guide you and request that you set up networking (Do this) When prompted, select...

Yes, I do have more than one RAID controller. I have and Intel SCSI controller with a mirror for the boot drive and then I have an LSI MegaRaid controller witha Raid5 on it for the VM's. I have had a problem in the past where the BIOS was set to boot the Intel controller but once the Kernel...

I am having the same problem. I just upgraded from 1.5 to 1.6 and I get the "/dev/mapper/pve-root does not exist" error on boot up. I ran the lvm command at the (initramfs) prompt and then ran lvscan. It couldn't find any lvm's. Then I ran vgscan and it found my volume groups. After that I...

Dietmar, Thanks for the reply. That was very helpful. Julian

I guess what I was wondering is if the "Advanced storage pools" feature in the upcoming version would allow me to create a cluster of two Proxmox VE servers, Server A and Server B. On Server A, I would like to set up a couple of virtual machines and have their storage mirrored to server B for...

I found a reference to the new advanced storage pools being ready for beta next month in this thread... http://www.proxmox.com/forum/showthread.php?p=9500#poststop Can anyone shed some light on what all this will support? In particular, I am looking for something like DRDB support so I...

I don't know what sort of problems you are referring to but I have installed Proxmox VE on a Supermicro X8SAX motheroard with an I7-920 processor. Not exactly a xeon 5500 but they are in the same processor family. I am using an older Intel SCSI RAID controller with a pair of 32GB SCSI disks to...