Search results

true. to be honest Im still not 100% sure I cant live without them... Ill internal network is ok with 9000 (hopefully). Its all unifi. from vbr0(+vlans) for the pfsense and out its 1500. So I was thinking that this might not be the best idea. Ill re-test.

Hi, I have a 10Gbe Unifi network linking proxmox's (one DAC SPF working as bridge - vlan aware) TrueNAS, pfsense and some other VMs with the important workstations. With some initial testing I had a throughput limit with the default MTU and truenas (SSD vDevs) so I enabled jumbo frames in the...

OH NO. You havent got the correct card for what you need to do :) Sorry Your card is running fine! I see no error in your Device manager. A40 is a compute card. NOT a "graphics card". The "A40" graphics card is called A6000. I know its confusing as you see DP connectors at the back, but I...

Are you talking about Windows as Compute only right? (NO graphics mode!)

Im puzzled with your problem. I have moved to some ASUS servers too. dual 7763 too. I havent added any GPU yet but I might do in a couple of weeks. All my boxes at the moment work with bios defaults + IOMMU (4g decoding is default I think). I _DO NO_T have vGPU or other slicing/licensing so I...

hmm... I honestly dont remember. I was pissed and I edited setting without thinking much... I dont think gigabyte servers have a way to export in text the bios config?! no?? I have two gigabyte server with passthough working. The one above was a problem with A40. my other system has 8xA30 and...

just for future reference: Even though my IOMMU, 4G decoding and SV-IOR etc setting where ON (Gigabyte Epyc Milan chassis) I have to turn ON other random settings (honestly not sure...) to get it working... (I know, not the best troubleshooting but at some point I lost track)

hi all, I cant get around this code 12. I run a similar setup, Epyc and 2x A40s (gigabyte MB). On linux I dont see any problems but on windows I get the code 12. IOMMU is ON etc. (I have followed the reddit passthrough guide etc). My grub line is: "quiet amd_iommu=on pci=realloc...

nop. I tried to change it manually but nothing...

yes root@ubuntu:/# gdisk /dev/nvme0n1 GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT.

sorry, I did a full p2 delete, then "n" (same geometry as before).set EFI id etc. then reboot. then proxmox-boot-tool format. reboot. init (failed). gdisk x/c/2 and set id again. reboot. (c in expert more is to change the partid by hand) init again (failed..)

Nothing :( its crazy... after recreating the partition I did a couple more tries but no-go... ubuntu@ubuntu:~$ blkid /dev/mapper/pve-root: UUID="d63481d3-2315-4a28-86b2-fbcf90a3be52" BLOCK_SIZE="4096" TYPE="ext4" /dev/nvme0n1p2: UUID="3911-0CFA" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI...

nop. Ill try it.

just did but I get the same error..

Maybe you can advice me also? Anyone has an ideas how to get out of this situation? Partition 2 is correctly formatted and the right EFI type. (re-applied it with fdisk just to be sure...) run: proxmox-boot-tool format /dev/nvme0n1p2 All ok here. But... init wont work. Disk /dev/nvme0n1...

Anyone has an ideas how to get out of this situation? Partition 2 is correctly formatted and the right EFI type. (re-applied it with fdisk just to be sure...) Disk /dev/nvme0n1: 3.64 TiB, 4000787030016 bytes, 7814037168 sectors Disk model: Corsair MP600 PRO XT Units: sectors of 1 * 512 = 512...

Is this true for ZFS filesystems? (probably inside the ZFS-DATA partition) Thanks

Usual tools you mean for sqlite?? Any idea how to rescue the VMs and LXCs? Thanks

My main NVME (ZFS) has messed up boot and I can't seem to find a way to fix it. I installed a second PVE from scratch on an other NVME and Im trying to rescue/copy the VMs/LXCs from the first drive. I can mount the "rpool" and "zfsdata" with "zpool import -R /mnt/firstrpool -f rpool" but...

yes the 7.2 iso doesnt work :S