Search results

Hello everybody. Since two weeks i had no hickups so this issue seems to be solved by removing the gateway from network card on local LAN (windows 2003 VM). I dont know exactly why this not happens with same settings under native windows but anyway you can mark as solved maybe it helps others...

Good morning. First thank you for your help. I noticed different problems that maybe solved. 1) Driver e1000 with original intel driver had duplex problems logged into eventolog which seems to be solved by virtio. 2) Not reachable WAN network card seems to be a configuration error under...

Ups ok ... seems i understand now the problem as the VE has it own ip and own firewall. I Thought i can block the incoming bridge traffic ... maybe ?!

Removed the 2 rules in / out ACCEPT but still not blocking the BAN IPSET on VE. So what exactly do i have to tick ? Only Firewall or IP FIlter also YES ?

Hi ! I would block some CIDR ranges from external. Therefore i activated firewall but i assume there is something misconfigured. Datacenter > ENABLED (default policy ALLOW / ALLOW ) but i have also 2 rules in / out ACCEPT (as i had problems before reaching my server) PVE -> ENABLED also 2...

The W2K3 worked perfectly until mainboard defect so after switching to proxmox I used latest windows intel driver. First i tought its an ethernet card problem so i bought a new RTL8125 chipset (IB-LAN300 Icybox 2.5 card). I use it now with r8169 driver in modules. I know there are newer drivers...

Latest virtio 174 (52.81.104.17400) which is packed in 208. Before i used E1000 NIC and original Intel drivers with same problem but one difference - the intel original driver told me a duplex conflict happend in eventlog after which i had to restart networking by commandline. With virtio...

Sorry for warming up. I noticed that this not belongs to W2K3 because it happens only when traffic is increasing. So it seems to be a problem of "high load" ? I also noticed a lot of other similar problems proxmox related when load is high. Please look into again or tell me how to debug. Thank you.

Latest virtio is 174 (afaik in 208) ... if i could set 100M permanently (no autoneg) it would be great but it wont work - dont know why.

Yes - its a VM (sorry). The NICs i tried all worked under Windows 10+. I also folllowed all best practices guide. The only problem is a duplex conflict appearing in windows evenlog (when using e1000). Whenever i use virtio drivers this will not happen but network card stop working after 1 and...

Hello. Proxmox 7.0 and latest 7.1 tested VE container with W2K3 (currently virtio drivers 174) Onboard network Intel (works fine) and PCIe extra card (has problems). First i had original Intel driver installed (E1000 in settings) so i thought the drivers are bad. Next changed PCIe to I219 but...