Search results

The solution is continue without GRUB configure and then this command in shell on root user: grub-install.real /dev/sda1 grub-install.real /dev/sdb1 grub-install.real /dev/md2 update-grub The similar solution https://forum.proxmox.com/threads/problem-with-grub-upgrading-pve-6-4-15.115376/ Best...

dev/sda

hi, In during upgrade pve I have a comunicate in attachement. Choose grub devices. This is software raid, When I choose dev/sda and dev/sdb I have a error ;/ lsblk -o NAME,MOUNTPOINT NAME MOUNTPOINT loop0 loop1 loop2 loop3 sda ├─sda1...

LXC1: [root@dev1 ~]# ip r default via PUBLIC_IP dev eth0 10.0.0.0/24 dev eth1 proto kernel scope link src 10.0.0.10 10.0.0.1 dev eth1 scope link PUBLIC_IP dev eth0 scope link 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth1 scope link metric 1003

ok so I change subnet as below and nothing change: 1 LXC eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.0.12 netmask 255.255.255.0 broadcast 0.0.0.0 inet6 fe80::4c30:3ff:fe80:c17b prefixlen 64 scopeid 0x20<link> ether 4e:30:03:80:c1:7b...

Sorry but I added interface eth1 from proxmox GUI. I don't change another network settings on LXC. Should I ?

yes, vmbr1 is set to autostart. After restarted proxmox interface is visible and up.

Hi, I'm new in Proxmox solutions. Actually I have one vmbr0 Linux bridge on proxmox host with eno1 bridge to public network. My lxc have one eth0 which is connect with vmbr0 bridge + failover public IP and gateway is public IP proxmox host. This configuration is okey to my lxc because I use...