Search results for query: vendor-reset

...(pid 3392) due to QEMU startup error TASK ERROR: start failed: QEMU exited with code 1 Which is after the following: I managed to get vendor-reset added as shown: cat /etc/modules vfio vfio_iommu_type1 vfio_pci vendor-reset which is confirmed by the following (although kernel is tainted...

Wonderful guide. This works pretty well with Ryzen 6600H as well, mine is a GMKTec M6. I meddled a lot with vendor-reset repo since my VM wasn't working, but since realized that RadeonResetBugFix was all that I needed. A key point to note is that just after installing Windows, shut down the VM...

I can pass the GPU to an Ubuntu VM, also i played games on it, i have the vendor-reset installed, tellme what command do you need to run. this appear when i run the machine: May 15 10:17:47 proxmox kernel: vfio-pci 0000:01:00.0: AMD_POLARIS10: performing pre-reset May 15 10:17:47 proxmox...

RX570 requires vendor-reset (lots of threads about that on this forum). See if it works with Ubuntu 24.04 LTS installer to make sure it's not a Windows (driver) issue. And make sure you see reset messages in the Proxmox system logs from vendor-reset.

I was able to solve this like so. I am assuming you are using vendor-reset. Make sure vendor-reset is integrated with initramfs. According to gnif, this is system-dependent, but here are my steps anyway: 1. Add vendor-reset into /etc/initramfs-tools/modules. # echo 'vendor-reset' >>...

Hot dayum... :cool: Had to register to the forum to comment on pcuci post. I've been tinkering with my main computer wanting to try passthrough, specifically for GPUs. I got passthrough to work after a couple of hours of tinkering with Proxmox VE 8.4. I've tried on Windows 11, Fedora KDE 42...

nice clarification on sequencing of events i am doing a lot of nvme pass through and the issue in bold is deintely an issue, i wish we could black list by IOMMU group as that would fix that issue, i was also looking through logs at startup and noticed without blacklisting ZFS starts before the...

1. I noticed your GPU has 4 things in the group. Make sure IOMMU is 'Enabled' (not AUTO) in the BIOS. 0b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] (rev c1) 0b:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi...

...amd_iommu=on iommu=on iommu=pt initcall_blacklist=sysfb_init video=simplefb:off,efifb:off,vesafb:off nofb nomodeset" I had disabled vendor-reset (apparently my card is not affected) and re-enabled the vfio, vfio_iommu_type1, vfio_pci, vfio_virqfd modules; I found that I had a bad hardware...

Did you revert back the commented out line on the kernel modules? Currently, it looks like you only have vendor-reset enabled? All others are commented out. vfio_pci vfio vfio_iommu_type1 vfio_virqfd Also you have two blacklist files? Can you make it into one? e.g...

I did not realize that this passthrough worked before for you. I use the same PVE and kernel version with a 6950XT and that works fine (with a Linux VM). I do have ROM-Bar enabled but no other blacklisting or vfio-pci binding or kernel parameters as I use the GPU for the host when the VM is not...

Okay, I removed vendor-reset. Followed your suggestion re: Ubuntu - nope, nothing. Black screen, "no signal". I messed around with rombar and primary GPU. vga: none the whole time.

...Proxmox message (for 6000-series AMD GPU and many other devices) and not an error (nor an indication of a problem). It's not related to vendor-reset. vendor-reset does not support 6000-series AMD GPUs like yours (see https://github.com/gnif/vendor-reset ) and therefore you do not need it. I...

I think it was related to a kernel upgrade but I can't be sure. I'm now on Proxmox 8.4.1 and kernel 6.8.12-10. It worked solidly for over a year but I was on kernel 5.13.19-6, possibly also a 7.x version of Proxmox. My understanding is with the newer kernel versions, some of the requirements of...

Hey after i watched a video from picloud where he tested his new system i did the same to my running proxmox and i was shocked. why are my iops so incredible low and my rpool (ZFS) The nvme are rated for: - read: 7400 mb/s - write: 6500MB/s SLC Cache How can i make it faster (its in production...

Hi! I recently trying to migrate my homelab to proxmox VMs. The first VM that I tried to setup is my TrueNAS that run Plex and some small apps.. so I need passthrough my GPU, an Intel Arc A380 Low Profile. But I'm receiving an error during when I start the VM This is my actual configs and...

I just had one of my Radeon VII's die, also. I don't know if it was caused by the reset bug or the gpu-reset script work-around or if it was just time for it to die. The other card was still working. I've decided to move away from the Radeon VII's for my Proxmox build. It's sad, because...

I am following Proxmox documentation https://pve.proxmox.com/wiki/PCI_Passthrough https://pve.proxmox.com/pve-docs/pve-admin-guide.html#qm_pci_passthrough and trying to passthrough onboard SATA controller to an OMV VM. IOMMU is enabled in the BIOS/UEFI, SATA controller is the only device in...

...I have left as a trace of what happened. Unfortunately I don't have the last error message when the card tried to go into power saving mode then died forever. The errors on the screenshot show what I was getting when the cards worked for ROCm after gpu-reset script and vendor-reset. Greetings

...| grep reset [ 26.542672] pcieport 0000:d7:00.0: unlocked secondary bus reset via: __pci_reset_function_locked+0x3a/0x60 modprobe -v vendor-reset modprobe: FATAL: Module vendor-reset not found in directory /lib/modules/6.12.25-x64v3-xanmod1 Did an apt update/upgrade, and got follow errors...