Search results for query: n5105

I installed intel-microcode(3.20221108.1) from the Debian unstable repo on Beelink EQ59 N5105. I feel the device is as performant as before. You can run benchmark programs such as pveperf before and after installing the microcode to check the performance difference.

...KVM improvements will be released on Sunday. https://www.phoronix.com/news/Linux-6.2-KVM I hope that will solve the problem. NAS motherboard N5105 (4x i226) Proxmox 7.3-6 Kernel Linux 6.1.2-1-pve #1 SMP PREEMPT_DYNAMIC PVE 6.1.2-1 and activated c-state 1 in the bios. Have 4 machines...

Update... 4 SBC Odroid H3 Intel N5105 boards running k3s cluster in 6 VM, Kernel 5.19.17-1 after 3 days uptime since I configured "intel_idle.max_cstate=1" in kernel boot options, yesterday I had a reboot from one of the VM, no logs about the crash, only reboot, It is a nightmare.... any...

Currently I have the following miniPC boxes in testing with the following processors. N6005 (6x i226) CW-NW11v2 N5105 (4x i226) CW-FMI01v5 J4125 (4x i226) J4125-4L-i226 J4125 works flawlessly. So this is the last I will be mentioning it on this post. N5105 and N6005 both suffers frequent VM...

I use two NUC11 with N5105 BIOS (ATJSLCPX.0038.2022.1114.1802) and one NUC 11 N6005 same BIOS Version PVE Manager Version pve-manager/7.3-4/d69b70d4 PVE Kernel Version Linux 5.19.17-2-pve #1 SMP PREEMPT_DYNAMIC PVE 5.19.17-2 (Sat, 28 Jan 2023 16:40:25 Several Linux VMs freeze sporadic. One...

I also had irregular freezes and crashes with stock Proxmox 7 Kernel. I'm running one OPNsense VM and one Debian LXC container on a budget N5105 barebone from aliexpress with no special BIOS and Kernel settings. Switched to Proxmox 6.0.15 Edge Kernel 10 days ago and my OPNsense VM is now...

I continue with problems, some crash with 6.1 Kernel, now back to 5.19 and try some settings, It is a nightmare. People that is using flag "intle_idle_max cstate=1" in kernel boot options, also Are you disable BIOS C.-states ?.

...64GiB Ram, mit zwei Consumer-SSD im Mirror) würde ich im Vergleich dazu nicht (mehr) empfehlen: zuviel mechanische Bastelei, und der Celeron N5105 ist einfach nur schwach (im Vergleich zum Ryzen 7). Mein NAS (ebenfalls per PVE) läuft hingegen auf einem HP Microserver Gen10+, an dieser Stelle...

HW Tone mapping works for me as well, but I still get “AVHWDeviceContext … No matching devices found.” error within Plex log. Is this with your setup as well? (This error should mean that it is not working according to Plex, however this is clearly not the case in reality, since tone mapping is...

Nice , Do you have some special config in proxmox, Odroid bios.. VM or anything else ?, What kernel version are running on VM machines ?

...with those crashes on Odroid, I just want to add another datapoint as it seems I had more luck: I have an ODROID-H3 with "Intel(R) Celeron(R) N5105 @ 2.00GHz", 64 GiB Ram and two cheap (consumer class, not recommended!) SSD as rpool. It is up and running since 15th of December with slowly...

Multiqueue If you are using the VirtIO driver, you can optionally activate the Multiqueue option. This option allows the guest OS to process networking packets using multiple virtual CPUs, providing an increase in the total number of packets transferred. When using the VirtIO driver with...

...there is no `/dev/fb0` on the host. I have no clue if there is anything I missed. Some relevant information as below: * The host is an Intel N5105 with 4x i226 device. * It now runs kernel 6.1.2, but the fb0 wasn't there when it was running 6.0.9 either. * GRUB_CMDLINE_LINUX_DEFAULT="quiet...

what should be put in multiqueue? It's a number. I am really not familiar with this. Is there a doc you recommend I go over to learn more? I run all that on a little N5105 appliance by the way, with intel I225-V rev0.3 NIC chip.

I took exact same actions and pfSense VM froze on me after 11 days. Now I'm trying 6.1.2 kernel. I had 7 days VM uptime on it but had to reboot Proxmox to perform an SSD firmware update.

* NUC N5105, 8GB RAM running Proxmox Virtual Enviroment 7.x lastest and updated * * Running 01 VM -> Proxmox Backup Server 7,x lastest and updated, 04 cpus, 4gb* - Symptons: VM Randomly freezing irregularly and stop responding at all (only the VM, not the pve-hypervisor - stays normal) -...

UPDATE: I switched to OPNsense and experienced the same issue (I did get a max speed of 105 Mbit/s on my WAN interface) for my N5105 unit with 4 x 226-v (https://de.aliexpress.com/item/1005004627244223.html). First, I thought that something might be wrong with the negotiation of the speed...

I have 6 days uptime. n5105 odroid h3 Kernel 5.19 no microcode no special bios or kernel settlngs VM Dietpi Home Assistant Red Hat 9 Alpine 3.17

Be aware that there are (still) problems going on with this CPU-family (and seemingly virtualization); but YMMV: https://bugzilla.proxmox.com/show_bug.cgi?id=4188 https://forum.proxmox.com/threads/vm-freezes-irregularly.111494 https://forum.proxmox.com/search/5635013/?q=N5105&t=post&o=date

https://pve.proxmox.com/wiki/Pci_passthrough#GPU_Passthrough