Search results for query: nvidia-smi

...but everything works fine as before as T4-8Q on a Win10 machine on which I successfully updated the guest drivers as well. I also have a P40 but I use it on a direct passthrough to a Linux VM, so it's not shown on nvidia-smi output. Lmk if you want me to investigate more on that card as well.

...passing the GPU’s ROM), but nothing works. Inside the VM, I always end up with this: marcosms@pi-hole:~/descargas/nvidia-patch-master$ nvidia-smi No devices were found marcosms@pi-hole:~/descargas/nvidia-patch-master$ sudo dmesg | grep -i nvidia [ 3.743446] nvidia: loading out-of-tree...

...with oculink. It detects all three GPU. But when launching a VM after restarting the physical server, only two show up on the VM under nvidia-smi. I have to manually remove the PCI devices and re-add them (sometimes several times, with several reboots of the VM) before they are all detected...

...00000000-0000-0000-0000-000000000302 TASK ERROR: start failed: QEMU exited with code 1 I get proper returns when running mdevctl types nvidia-smi and nvidia-smi vgpu, so it appears that the 16.9 driver (535.230.02) installed correctly on the host. Mdev Type: nvidia-47 Available...

...a repo associated with the patching of the grid driver, it details the steps fairly well gridd-unlock-patcher if you follow that repo and the license repo instructions it should work, then just run nvidia-smi -q | grep "License" as listed in the license repo instructions to check it to make...

yeah it's a simple as it sounds. install the grid driver which includes the nvidia-gridd binary and patch it. you'll need to have the licensing server running so you can download your certificate from it. the repo for the patching utility includes instructions from memory. I normally use the...

...vgpu_ulock-rs. All the installation went smoothly without problem. I am able to see expected outputs for the following commands: nvidia-smi mdevctl types and nvidia-smi vgpu I have also set up a new version of the license server. Though not tested it yet because of the reason below. I...

...usr/lib/x86_64-linux-gnu/libnvidia-ptxjitcompiler.so.1 none bind,optional,create=file When I run nvidia-smi inside the LXC, it reports that the command is not found. When I try to install the NVIDIA drivers directly in the LXC with apt, it fails with unable to make backup link of... Invalid...

...5.5.0-2 qemu-server: 8.4.1 smartmontools: 7.3-pve1 spiceterm: 3.3.0 swtpm: 0.8.0+pve1 vncterm: 1.8.0 zfsutils-linux: 2.2.8-pve1 Output of nvidia-smi vgpu -s GPU 00000000:41:00.0 NVIDIA RTXA6000-1B NVIDIA RTXA6000-2B NVIDIA RTXA6000-1Q NVIDIA RTXA6000-2Q NVIDIA...

I attached the dmesg and nvidia-smi -q output as files. Also here is the config for that specific client ubuntu 24.04 vm: root@titan:~# cat /etc/pve/qemu-server/1102.conf agent: 1 balloon: 0 bios: ovmf boot: order=scsi0;net0 cores: 8 cpu: host efidisk0...

can you post the output of lspci dmesg from the host? and nvidia-smi -q from the guest? since you can install the driver and nvidia-smi (in the guest) shows the card, it's a different issue than the OP, so it might be better to open a new thread

...lxc.environment: NVIDIA_DRIVER_CAPABILITIES=compute,graphics,utility,video lxc.hook.mount: /usr/share/lxc/hooks/nvidia root@gpu-test:~# nvidia-smi Wed Sep 3 14:41:52 2025 +-----------------------------------------------------------------------------------------+ | NVIDIA-SMI...

oh good, wonder what is causing your issues then. what does your profile config look like? here is an example of mine on my main VM i currently am using all 8GB on (using the "GRID T4-Q8 (nvidia-233)" profile) [vm.128] display_width = 3840 display_height = 2160 max_pixels = 8294400 cuda_enabled...

the license is seemingly working - I ran the patch and nvidia-smi says I have 3 months until expiry. thanks, will try that new repo and see how that goes. could also be aging hardware, I dont think my CPU even supports AVX2, I am stuck on AVX - really old repurposed server hardware from 2014 :D...

use `nvidia-smi` check if your P4 in TCC or WDDM mode. Try `nvidia-smi -fdm 0` if not in WDDM mode. Then you should see the GPU from task manager.

if you use the newer drivers with the linked repo you no longer replace the xml file, just compile that repo and install the patched driver. i got stuck on the same thing for a minute thinking that was still how it worked as the guide said, but it has been patched i guess.

Funny error message as nvidia-smi is part of the nvidia driver which installed for the card ... Btw. you should blacklist nouveau driver before if using/installing a nvidia driver. Did you check for compatibily list if your nvidia driver version support the P100 ?

...LaneErrStat: 0 Kernel driver in use: vfio-pci Kernel modules: nvidiafb, nouveau, nvidia_vgpu_vfio, nvidia Problem: nvidia-smi NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running. Any...

cant seem to get it to work - patched vgpu.run file installs ok. nvidia-smi and nvidia-smi vgpu show the card ok. mdevctl types shows nothing, with the original vgpuConfig.xml, and the ones from v535-261, v535-230. nvidia-vgpud.service isnt running, but it says it ran successfully, didnt seem to...

v570 is awesome if it works! my biggest gripe with the P4 is needing to downgrade CUDA versions in current packages and recompile due to backwards compatibility issues. but I tried to install a v550 driver yesterday and while it installed on the host fine, I couldnt get the mdev types to show...