Search results for query: lxc

...consuming between 4-7 W. My point is that there are reasons why and how I ended up with this deployment.) I was running tests with both VMs and LXCs, but yes, VMs only have memory migration, but it didn't always hit 100 Gbps speeds on said 100 Gbps IB system interconnect. You said that it...

...performance, and better storage utilization. I dont understand what you are reporting. no disk IO moves on live migration of a shared disk. and memory only migrates for virtual machines, not lxc. in any event, if you really want to check your read performance, you can just use fio in your guest.

...I am currently using EC (2,1) for my "simple" three node Proxmox HA cluster which serves my DNS, Windows AD DC, and AdGuardHome and where the LXC/VM disks reside on the distributed EC Ceph cluster. The fastest that I have been able to achieve, using Intel 670 p 1 TB NVMe SSDs (during some...

Plex and Tidarr which are in LXC containers. no VM.

...HA. On host #1 I installed two VMs (IPfire 2.29 U199, Linux Kernel 6.12.58-ipfire #1 SMP PREEMPT_DYNAMIC) for testing an development and also one LXC and two other Linux (openSuSE 15.6) machines. Host #2 is used for some further VMs (Win/Linux). Now the problem I'm facing: The two IPfire VMs...

...und die I/O-Fehler danach. Für heute Abend — Diagnose: # Backup-Archiv auf Integrität prüfen: zstd -t /mnt/pve/backup-opnsense/dump/vzdump-lxc-121-2026_02_12-04_00_14.tar.zst # Archiv-Inhalt mit Timestamps auflisten: zstdcat...

I am working on getting a local LLM working using LXC for my Homeassistant on a Strix Halo chip and three pieces are required: 1) Kernel 6.17 (done) 2) firmware-linux-nonfree 20260110 (conflicts with pve-firmware) 3) ROCM 7.2 (dependency issues) Is there any way to work around pve-firmware...

Thank you so much. I had a similar issue, this command also reported LXC not running like all the pct stop variants. GUI said it was running, none of the pct start commands were working either. Finally, thanks to your post I discovered lxc-start -n ### which worked for me to get the container...

...einer CT wollte ich einen restore durchführen, allerdings bekam ich folgende Meldung! extracting archive '/mnt/pve/backup-opnsense/dump/vzdump-lxc-121-2026_02_12-04_00_14.tar.zst' tar: .pfad zur Datei - MA/Finales Transkript.docx: implausibly old time stamp 1915-01-23 22:02:56 tar: .pfad zur...

Subject: Migration failed: Storage 'local-lvm' (LVM-Thin) not available on target node Message: Hi everyone, I am trying to migrate an LXC container from my main node (pve) to a second node (minipve). Source Node (pve): Has local-lvm (LVM-Thin pool named 'data'). Target Node (minipve): Only has...

...möchte halt zunächst einmal einen Main-Server haben, auf dem ich ein gemirrortes ProxmoxVE + nen gemirrorten SSD-Pool für die Root-HDDs der VMs / LXCs habe und dann einen "Sack voll SAS-Platten" im Raid-Z1, wo ich dann mein Datengrab drauf einrichte (wie hier beschrieben), sprich so: - 2 x...

Late Reply but one Option might be to mark the File as something that Proxmox VE shouldn't touch. I do this for /etc/resolv.conf inside a PiHole LXC Container, but I guess with the right Name it would work for anything. File /etc/.pve-ignore.resolv.conf: #...

Fast scheinst du das Thema ja schon verstanden zu haben, aber dazu noch ein Paar kleine Hinweise: Die Hardware, die dir dein Kollege da überlassen hat ist heute defakto Elektroschrott. Das sind Ivybridge Xeons, die 2013 rauskamen. Aus heutiger Sicht haben diese Systeme immense...

Hast du in den LXC Optionen, Cifs aktiviert?

Servas mitnand, ich , ein geübter Anfänger versuche mein fritzNas mit einem LXC, auf den Jellyfin installiert werden soll, zu verbinden. Habe einen priviligierten Container mit Debian Trixie erstellt. Der läuft auch ohne Probleme. Ich bekomme auch ein Ping zur FB. Habe cifs-utilis installiert...

...zpool import -f -o readonly=on tank 3. To create a simple SMB/Samba share: Create an unprivileged LXC container (e.g., debian 13 template, 8 GB disk, ACLs enabled, 2 cores, 1024 RAM, IPv4 DHCP) Modify your .conf file (e.g., nano /etc/pve/nodes/my-server/lxc101.conf) to add your mount points...

...I did install the latest 6.19.1 on my proxmox runnnig amd strix halo (framework desktop), and that kernel actually fixed the problem in my immich lxc container running onnx models. Before i was running 6.17 from proxmox and there are missing amd patches which seem to prevent being able to run...

...the boot process. I'd like to avoid starting from scratch with a brand new install on the existing hardware, but I will lose the VMs and LXC containers running on the pve server. I'll probably run into error with the cluster members if I try to use the same hostname and IP address during...

...for GPU passthrough to Windows VM but I have found that for AI workloads, that it has been better for me to share GPU resources between LXCs than using a Windows VM. So, there actually two things at play here: 1) The Ceph cluster is being evaluated to take over for my main "do-it-all"...

you dont need pci passthrough for lxc- just would need to install the proper nvidia driver based on hardware and kernel deployed. You are better off creating an installation script, especially if you intend on having multiple nodes with GPUs. FYI, that 4x node solution is VERY old and has...