Search results

Hello, I am a home user that just likes to play around with tech and like Proxmox a lot. I recently created an SDN and moved my VMs into it and everything works great, but I had an issue with a printer/scanner that was not getting "discovered automatically". The reason for this is that mDNS...

In the systemd manual page, seems like this is expected behavior (guess NetworkManager does not follow this as my laptop / PC works without it): I edited the option 121 in OPNSense to add the default route there and now it is picked up properly by the LXC. So turns out not a proxmox issue, but...

Apologies for the really basic question, but after setting up an LXC using ubuntu-24.04-2 template I have noticed that it is not picking up the default gateway. The only change to defaults was basically choosing DHCP instead of static for IPv4. I noticed proxmox seems to know how the distro...

Thank you, this seems to work: # cat /etc/modprobe.d/vfio.conf options vfio-pci ids=1022:15c1,1022:1669 disable_idle_d3=1 softdep xhci_pci pre: vfio-pci softdep xhci_hcd pre: vfio-pci blacklist thunderbolt Here is the kernel driver state: c9:00.0 1300: 1022:14ec Subsystem: 1022:14ec...

Hello, I have a system with Ryzen 8845HS and the following IOMMU groups: ...

There is an update to the pve-container package reading: pve-container (6.0.13) trixie; urgency=medium * setup: switch network configuration from network-scripts to NetworkManager for RHEL 10 and derivatives like CentOS Stream, AlmaLinux and Rocky Linux. -- Proxmox Support Team...

So, I have a question: why do you enable wpa_supplicant specifically for that interface? I would keep it disabled and use just `/etc/network/interfaces` to control everything. For example: allow-hotplug wlp6s0 iface wlp6s0 inet static address 192.168.5.10/24 gateway 192.168.5.1...

I anyone comes across this, apparently there is now a limit to the number of characters to the serial number. I had attached the disks as: dev=/dev/disk/by-id/.... qm set 9003 -scsi1 ${dev},serial=$(lsblk -nd -o model,serial ${dev} | tr ' ' '_'),backup=0 Concatenating the model and the serial...

Hello, After a recent update, I am no longer to start a VM. I get this error: root@lab:~# qm start 9003 kvm: -device scsi-hd,bus=virtioscsi1.0,channel=0,scsi-id=0,lun=1,drive=drive-scsi1,id=scsi1,serial=WDC_WDxxxxxxxx-xxxxxxxxxxxxxxxx: The serial number can't be longer than 20 characters when...

I have 2 VMs in my Proxmox: one has GPU passthrough for my main Linux desktop. The other is a Windows VM which I use for work (accessing my employer). I generally remote-desktop from Linux into the Windows VM with Remmina (it works great because it's basically a "localhost" connection) during...

So, luckily I had remote desktop enabled, therefore I was able to RDP into the VM running on my laptop. Once logged in, I reinstalled the full VirtIO driver suite from the ISO. This ended up fixing the problem and I was able to log in from the virt-manager UI after rebooting.

Hello, I am a hobbyist using Proxmox on my main system. My desktop is a VM with GPU passthrough. I also have other VMs and one of them is a small (ram/disk) Windows 11 machine. I need to transfer this machine to my laptop which runs Fedora and only has VirtManager. To that end, I followed...

So far this has not been an issue at all. The problem only exhibits during prolonged writing to disk. I mentioned Steam downloading as an example, but if I am not actually downloading while gaming (and you can disable updates while gaming) then there is no issue.

I know exactly what you mean. The pain my laptop still gives me to this day is terrible (I have the Nvidia disabled right now due to instability in 6.9.x kernels). I will look into this more. If the driver is not in the kernel OSS codebase I could get some other controller that has the same...

I am thinking of using an external SAS enclosure, something like this: https://www.highpoint-tech.com/product-page/rocketstor-6434ts Since the controller is a PCI card, does the connection to the box reduce the performance or is it equally fast? My plan is to add the PCI card, then purchase...

So, I checked and I have two identical 1TB Crucial MX500 disks which seem to have "Micron 256Gb 64-layer 3D TLC". I am not sure how bad these are compared to other SATA models of their time, but clearly are not up-to-par currently... I think I have the following two problems: I have set up a...

Hello, I use Proxmox to host a VM that I use for general purpose desktop (with GPU passthrough). I've noticed that my system becomes unresponsive (I would describe it as high latency in reacting to my input, similar to memory thrashing due to swap usage) during periods of high disk I/O. For...

Well, here's another experiment that might surprise you. I used both wget and curl to download the file just now from command line. Both were ran on host D and wrote remotely to the samba share mounted from VMhNAS. They both worked: root@pve:~# curl -o...

Hello, I have a Dell UltraSharp U4025QW monitor which has a feature that causes the kernel to crash: the iMST (internal Multi-stream Transport). This iMST allows you to use the "daisy chain" DisplayPort feature and connect two separate monitors to the same port. In this particular model, there...

I just want to update this thread in order to report that the BRIO is now working just fine. Turns out I was using a very slow 480Mbps A-to-B cable so the hub to which the BRIO was connected was communicating very slowly with the Proxmox host. Now that I have a 10Gbps cable between the hub and...