Search results for query: hba truenas passthrough

Passing my 9300-16i (it-mode) works as expected in both Windows and TrueNAS. When I attempt to add the pci passthrough for my Ubuntu VM, which works otherwise, it will not start. No console output, no green "play" icon, it just sits forever. I'm unable to press 'e' to get to any menu, as the...

I have two Lenovo Thinkstation P520s I am using for my home servers. I plan to use Srv #1 as my main server and Srv #2 as my backup server. I also have a NAS. Srv #2 has the same processor with 32GB of Ram. I am connecting Srv #1 and Srv #2 with a Mellanox X3 card using a DAC cable and Srv #1...

yes, what I found is I my disk is connected to the same controller that's why I lost connection. what can I do to solve it. please give a solution to sort this out

Is your boot disk (i.e. on which Proxmox VE is installed) connected to the same controller or another? Again, the host loses connection to the disk as soon as you start the VM. So either - the boot disk is on the same controller - your HBA controller (which you passthrough to TrueNAS) is in...

I am passing through 4 PCIe devices into a VM running TruneNAS Scale: an HBA330 SAS HBA, a Radian RMS-200 cache device, & 2 virtual functions created with SR-IOV on 2 10 GbE SFP+ ports of a Broadcam BCM57800 NDC in a Dell r730XD server. All four are successfully made available inside the VM...

Hi, I assume you passed through the HBA controller? It's probably in the same IOMMU as the disk controller you are running Proxmox VE, and thus becomes inaccessible once the VM starts. Can you please post the output of - pveversion -v - qm config <vmid>, replacing <vmid> with the respective ID...

This info I found somewhere as well, but I'm not sure if it's valid for the "old" TrueNAS based on FreeBSD or for the "new" FeeeNAS Scale based on Debian. However, I couldn't find out if my F4-424 has regular PCI controller or an HBA. I don't know what the difference is, but there seems to be i...

As far I know TrueNAS recommends to use a dedicated SATA PCI HBA for passthrough to the NAS vm so the NAS OS has exklusive access to the storage disks. That's what I do at my TrueNAS Scale VM

Hey, I'm setting up a homeserver for the first time and I am trying to pass my PCIe LSI 9300-8i HBA to TrueNas. My issue is that when I run the dmesg | grep -e DMAR -e IOMMU command I receive this output dmesg | grep -e DMAR -e IOMMU [ 0.010713] ACPI: DMAR 0x0000000074600000 000088 (v01 INTEL...

im attempting to passthrough a Dell H310 to a TrueNAS VM ive created (which i tested to make sure it boots up and works properly without passing through the SAS card), but whenever i try passing through the SAS card to the VM and attempt to start it, it seems to disable (?) all PCIe devices, and...

Great. So if had a server and the only possible boot sources were the front drive bays in which that entire backplane is connected to an HBA, I wouldn't be able to use 2 bays for mirrored boot devices and the others for storage? How does this differ from an on board sata controller where both...

There weren't any backup jobs or special activity happening at that time. 4 VM's and 1 CT were running at the time. Load around 4%. No GPU passthrough but I do have a HBA passed through and sometimes when rebooting TrueNAS it doesn't find the pool and I have to reboot pve to get it working...

If it's relevant, here's a copy of my own thread on the issue with more info (including hardware, though prior to updating):

Hi there, I created a TrueNAS scale guest using a passthrough 9300-8i HBA which works fine concerning the storage disks on the controller. But what is weird - in the host with zpool import pool: boot-pool id: *****************767 state: ONLINE status: One or more devices are configured...

Hi, I'm currently running into an issue where I can't pass through a known working GPU (Quadro K4000/GK106GL) to a VM. Whenever I start up a VM with this device passed through, I get QEMU exit code 1 after about 10-30 seconds. As far as I can tell, it doesn't reach the bios. Here is the output...

Forgive me in advance, I've been a VMware admin for over 20 years and am moving to Proxmox in my home lab. Having some mind-wrapping issues around some things that I'm hoping to bounce off a few folks. First, the setup, My vSphere cluster was backed by a TrueNAS Scale box running on some...

I am trying to figure out how to turn off a screen attached to a secondary GPU that the console is not being displayed on. I have a spare computer that used to be a gaming pc, that I'm using to run TrueNAS and other Linux OS's just to learn and have some fun with them. I have a 1660s in the main...

EDIT: I've done all the firmware updates in iDRAC and turned off the rombar setting hostpci0: 0000:02:00,rombar=0. For some reason rombar isn't working with that PCI HBA330. I tried disabling rombar on both hostpci0 and hostpci1 but the issue would come back. This last part is kinda strange and...

Well my own truenas rc2 I'm running as a vm in proxmox with a pcie hba sata adapter in passthrough mode. This works good enough and give me the benefit of proxmox backup function. Of course (since my old cpu can't do nested virtualization) I can't use VMs inside truenas but that's not really a...

Hi all, first post from me. After much internal debate and poc'ing where I can in hyperv between truenas 24.10 with docker versus proxmox with truenas vm and docker lxc, I went with the latter option on the grounds of better virtualisation and cluster support. Currently I have my truenas vm...