Search results

mine definitely requires both PCI devices to be passed through, is yours the 4 bay or 2 bay?

The traditional advice I've always seen is to have separate NAS and VM host machines

no, the hardware by design cannot be fixed, it needs a separate sata controller separate from the cpu but it does not have that, it is perma broken

I think I found a solution, try upgrading to kernel 6.11 https://forum.proxmox.com/threads/opt-in-linux-6-11-kernel-for-proxmox-ve-8-available-on-test-no-subscription.156818/ on 6.8 I was stuck at 2.0ghz no matter what once I upgraded to 6.11 I am able to get 3.1ghz all core 69C (w/ ptm7950) @...

just chiming in here to report this affects my device too

I'm not currently running proxmox on my instance so I'm unable to test at the moment. Sorry.

Hi, I'm on a 7840HS and I wanted to passthrough my igpu to a linux guest. I had it working on a windows guest with the same conf (but gpu accel didn't seem to work, I didn't test it thoroughly), but for some reason it does not work on a linux guest. The errors are in the github discussion link...

I just connect my minipc to the router itself lol don't have a gigantic setup yet so it's fine I'm currently working on igpu passthrough (of the 780M) to a linux guest to try ROCm.

current bios is v1.09 (latest @ https://www.minisforum.com/new/support?lang=en#/support/page/download/79), but there have been known to be BIOS issues in the past for this chipset (not just this particular minipc model). I looked up the microcode files to make sure there are no updates: # grep...

https://i.imgur.com/ugFotRa.png one of the first things tested

I think mine crashed when I stressed the RAM paging heavily but at least it does not crash on every single browser load now.

So in /etc/pve/virtual-guest/cpu-models.conf did you try: cpu-model: 7840HS flags -arch_capabilities;-hypervisor;-tsc_adjust;-tsc_deadline_timer;-tsc_known_freq phys-bits host hv-vendor-id proxmox reported-model host It should complain that some options aren't found or whatever...

No. It looks like the previous message is "This message is awaiting moderator approval, and is invisible to normal visitors." for some reason, so let me try to put it here again: in /etc/pve/virtual-guest/cpu-models.conf cpu-model: 7840HS flags -hypervisor;-ssbd;-tsc_adjust;-wbnoinvd...

UM790 = UM780, only difference being 790 has a 7940HS and a 780 has a 7840HS. Drivers, BIOS, almost everything is the same. 7940HS has an unlocked CPU multiplier so you can overclock it, but because the minipcs are limited by thermals/power (TDP) anyway, they perform almost identically to the...

Hi, in your /etc/pve/virtual-guest/cpu-models.conf try: cpu-model: 7840HS flags -hypervisor;-ssbd;-tsc_adjust;-wbnoinvd phys-bits host hv-vendor-id proxmox reported-model host you can replace 7840HS with 7940HS, they are the same minus binning differences. also in VM set cpu...

How do I generate a cpu-models.conf that is equivalent or as close as possible to what setting cputype: host in the UI would give me? That way I can test each flag one by one (or binary search for the flag that is causing the problem). For example, svm, among other flags (supported in host) is...

That's possible, but when I loaded all the tabs bare metal on windows 11, there was no problem. There have previously been reports of UM790 models crashing at either low power states or under stress, but a new motherboard revision was released to fix those issues and I supposedly have the new...

haven't yet had a chance to test everything yet but "max" crashes the host. Looks like anything with dynamic detection of CPU capabilities/features breaks it for some reason. Is this something I should report upstream (i.e. to QEMU)?

I did search for "Unhandled WRMSR" errors, the forums told me to ignore it! ;_; I don't think it's a PSU issue, I stress tested with s-tui for 10-15 mins @ 60-65W TDP and there were no stability issues although I can see how that wouldn't necessarily rule it out I ran it in x86-64-v2-AES, no...

Hi, it works! Thank you for the reply! I switched the cpu model from host to kvm64 like you suggested and I am now able to load all 400 of my tabs upon resume. Do you happen to know why? I know the 7840HS chipset is very new. Maybe kernels are not yet ready for the 7840/7940H/S/X chipset...