Search results

Yes, I’m using the lateat BIOS on my board now. It does support resizeable BAR, and does give the card the proper amount of RAM when inspected with lspci.

Yes, it is definitely supported. I have it working now in Ubuntu on a 6.5 kernel (see post #5 in Edit portion this thread). You just need a new kernel and drivers (installed in the VM) and to pass through the card properly to your VM.

First, thanks for the helpful suggestions! I've already tried the GRUB option and didn't notice any difference, so I've removed that again. GRUB_CMDLINE_LINUX_DEFAULT="quiet video=efifb:off" My virtual machine is running a 6.5 kernel with the latest Intel drivers. I tried to swap it to an...

Thanks for the idea! Passthrough is technically working. The GPU is in the VM and shows up in the lspci with the proper driver loaded, it's just not getting the re-size of the BAR (this is probably what you meant). My motherboard unfortunately doesn't seem to have an option disable resizable...

Hello, I have been able to pass through my Intel Arc GPU to an Ubuntu 22.04 64-bit server virtual machine. The host in an AMD Epyc 7402 on a Supermicro H12SSL-I running Proxmox 8.1. On the PVE host I have IOMMU working. Here are the steps that I've done. root@hyperion:~# dmesg | grep -e DMAR...

As another option, I guess I could do this transfer by hand to the new host. I would just like to figure this out as I've never had a Proxmox backup fail like this before.

I am trying to migrate all of my KVM virtual machines off a Proxmox 3.4 host to new hardware that is a 4.4 host. I have migrated all of my vms except one. I have a Windows 7 virtual machine that the backup fails everytime at 9%. This is a vm with an 80GB hard drive in RAW format (LVM storage...

Everything is stock Proxmox. I haven't install anything from the zfsonlinux site. A few weeks ago I setup a small pool of SSDs to temporarily, so this used to work (I used zpool destroy to remove the unused pool a few days ago). Unfortunately, I can't create new pools anymore.

Thanks for the reply, but this is a host that I've been running for a while now. I have restarted a few times already trying to get this to work. I use the pve test 3.10 kernel if that makes any difference.

Hello, I have a Proxmox 3.4 host, and for some reason, I can't create a simple zfs mirror. Here's what I'm trying to do. zpool create -f -o ashift=12 datastore mirror /dev/disk/by-id/ata-Crucial_CT256MX100SSD1_14330CEDCBB5 /dev/disk/by-id/ata-Crucial_CT256MX100SSD1_14290CA27F0F log...

Geez, I feel like an idiot. I looked at this stupid thing all day, and couldn't even get it to boot. I had created multiple directories like this. mkdir -p {minecraft,minecraft_backup, minecraft_ramdisk} As, you can see, the stupid space in my mkdir string created the wrong directory and as...

Hello, I'm trying to setup a Minecraft Server in a KVM instance for nephew. I have read that loading the maps in a ramdisk can greatly reduce the lag. I have this all working on my local hardware test machine (Ubuntu 12.04.3 Server), but when I add the tmpfs line to my /etc/fstab on Proxmox...

Thanks for the reply. My Proxmox cluster at the datacenter is all in production, so I don't want to upgrade that until I rule out any potential issue, but I do have a few Q9550 boxes at home that I can try it out on. I'm installing Windows 7 right now on one of them. I'll try to recreate the...

I just tried to do a fresh Windows 7 64bit SP1 install to test the box. The install went well and was working for a while. I did the Windows updates, and went to restart, and now I have the same internal-error message in Proxmox. Afterwards, I just updated to the latest updates, but I'm still...

Hello, I have just setup a new Proxmox 3.0 server. pve-manager: 3.0-20 (pve-manager/3.0/0428106c) running kernel: 2.6.32-20-pve proxmox-ve-2.6.32: 3.0-100 pve-kernel-2.6.32-20-pve: 2.6.32-100 lvm2: 2.02.95-pve3 clvm: 2.02.95-pve3 corosync-pve: 1.4.5-1 openais-pve: 1.1.4-3 libqb0: 0.11.1-2...

Thank you very much for the very quick responses. I've made the changes to the configuration file and restarted. Hopefully, the sporadic crashes are a thing of the past.

Thanks for the quick reply :) Just so I know, do I just remove the scsi disk from the web interface, and then add the disk back as an IDE disk? I assume I must need to edit the vm configuration file to make this change, because I don't see it in the web interface. Here's my current conf file...

Hello, I've tried to virtualize our first Windows server in KVM, and the box keeps shutting down sporadically. I'm not a Windows admin, but the Event Viewer has thousands of messages like this \Device\Scsi\Sym_hi1, did not respond within the timeout period. proxmox:~# pveversion -vpve-manager...

Here's the output of the HP Array Utility... proxmox1:~# hpacucli ctrl all show config detail Smart Array P400i in Slot 0 Bus Interface: PCI Slot: 0 Serial Number: PH6CMV1718 Cache Serial Number: PA82C0D9SU07KQ RAID 6 (ADG) Status: Disabled Controller Status...

I've been trying to figure out why I have been seeing so many io delays on my Proxmox Host (HP DL360-G5, Xeon(R) CPU E5335 w/6GB RAM and (4) 10,000RPM SAS disks). This is not a heavily utilized machine (load average: 0.15, 0.54, 0.68), but I'd like it to perform better if I need if for a bigger...