Search results for query: DL380 passthrough

Please search the forum for RMRR as this appears to be a common thing with HP servers. Here is a thread that might help.

Hi there, I'm creating a KVM virtual machine on my DL380 GEN9 (PVE 8) and attempting to pass the network card (eth0) through PCIE to the virtual machine in order to improve the network performance of my OPNsense virtual machine. I followed the instructions on the Wiki to configure this and...

Good morning. i customer of mine uses a HPE ProLiant DL380 Gen9 V4 server, running Windows 10 VMs and would like to use OpenGL on them. does anybody know if this machine supports GPU passthrough or any other way to get OpenGL running? thanks in advance.

Thank you so much Yes I did All the instructions, I just didn't do the kernel edit since I don't see that it will work in the long run and I kinda understand that it got included in proxmox kernel. As in the manual I did verfiy with (lspci -nnk) and I do get (Kernel driver in use: vfio-pci) ...

Did you enable PCIe passthrough as per the Proxmox manual? Without a clearer description of the failures, it might just be a configuration mistake or maybe you need a motherboard BIOS update. Did passthrough of the device give you trouble or could you not enabled VT-d? Do you known that Proxmox...

Hi My server is DL380p gen8 server, and I did read about and test various solutions but ALL of them failed. I must admit that most of them are about GPU passthrough, and I just need to passthrough my p420i controller from proxmox to truenas (and a sas hba later). So is there any proven way to...

Hi, Got an Asus Nvidia 1050 TI the other day and passed it through the whole card to a VM. After a bit of struggling I finally got it to work. Today I notice that the LED in the front of the server (HPe DL380 G9) are blinking red. I check the ILO and notice this: When booting Proxmox I also...

As the title suggests, I can’t enable iommu when I install proxmox with zfs raid 0 but it works just fine when I select ext4 filesystem. The goal is gpu pass through to a win11 vm. I’m using a dl380 g9, 2 e5-2690-v4 CPU’s, Rx6800xt and 2 nvmes in pcie adapters. It all works fine and I get an...

Hello everyone, I didn't mean to come to this and bother you guys but after going through all this forum (with many successful solutions), tenths of different guides and videos, building, configuring, destroying, rebuilding and reconfiguring to destroy again, I'm now officially desperate. I...

Hello All, As I have done other things in my professional carreer, I have missed some chunks of the IT, unfortunately also bigger chunks. Now working on my project I am in the middle of nowhere, exposing the ip of the management to internet. I am setting up one DL380 with Proxmox, 128 GB RAM...

Hello All, As I have done other things in my professional carreer, I have missed some chunks of the IT, unfortunately also bigger chunks. Now working on my project I am in the middle of nowhere, exposing the ip of the management to internet. I am setting up one DL380 with Proxmox, 128 GB RAM...

I have posted this information to reddit as well... but I have been having some issues getting PCI-E Passthough working correctly on my older gear. I wasn't sure if cross-posting there or somewhere else would be effective or not, but either way I was hoping to get some assistance in getting...

Good morning. i customer of mine uses a HPE ProLiant DL380 Gen9 V4 server, running Windows 10 VMs and would like to use OpenGL on them. does anybody know if this machine supports GPU passthrough or any other way to get OpenGL running? thanks in advance.

I have a hard nut to crack with starting the VM where 2 (the same type) PCIe network cards are connected with PCI passthrough. VM is running fine with one card, even if the second card is inserted in the PCIe slot. dmesg shows: [ 198.679707] vfio-pci 0000:0b:00.0: enabling device (0140 ->...

Hello everyone, so I manage to install windows on proxmox with nvidia drivers and parsec. VM has gpu passthrough RTX 3090. I can boot and it seams work good. But VM work stable by 5-15 minutes (in IDLE, game or on web browser), next get crash and restart. Parsec show messange "connection lost"...

Hello all, I am running Proxmox 7.2 on a HP DL380 G9 server and have done so for a while without any major issues except one - pcie passthrough. All steps have been followed (wiki etc). No matter what I try task log complains with "Error: start failed: QEMU exited with code 1". I am trying to...

Do you always read the release notes before manually upgrading and then reboot your server after an kernel upgrade so you can test the new kernel without being surprised, when the server isn't booting anymore, when rebooting weeks/months later? The 7.2 release note warned about "known issues"...

PVE wurde vor Kurzem von 7.1 auf 7.2 gebracht. Unter anderem gab es da einen Wechsel von Kernel 5.13 auf 5.15 und einige "Known Issues" bezüglich PCI passthrough: Ggf mal zurück zu Kernel 5.13 und testen ob es dann geht und außerdem prüfen ob dich die "Known Issues" betreffen.

I've been having this GPU passthrough issue with HP Proliant dl380 g9. The GPU is passed through to vm, but after installing drivers it either bootloops or freezes the guest. Both q35 and i440fx chipsets were tried. CPU is set in host mode. PSU's give sufficient power, server only consumes 250w...

Hi Discolai, I am having the exact same issues with my ProLiant DL380 gen9 when trying to enable IOMMU in Proxmox v7.1. I followed the official guide on how to enable PIC Passtrough but the output of the command "dmesg | grep -e DMAR -e IOMMU" is the same as yours, my output is...