Search results

Welcome to the Proxmox forum, Jaronski! Could it be that the ESXi guests are still running at the time of the migration (either the live migration or the cold migration)? Currently, the live migration in Proxmox VE for ESXi guests is implemented in such a way, that ESXi guests need to be...

Freut mich zu hören, dass du den Fehler nun beheben konntest!

Which repositories have you used to update to apparmor 4? Neither Debian nor Proxmox VE repositories have that version available.

How is the Bluetooth adapter passed through then? Are there any syslog entries?

Hi! This seems like a minor display error, but the warning can be ignored here, if the possible shortcomings of using the pve-no-subscription repository are clear. Edit: See the answer from @fiona, I haven't noticed the upper-left message before.

The USB protocol isn't as simple as it seems from outside - but that applies for most protocols on hardware/signalling level ;) There's still the possibility to use a USB NIC, but AFAIK Ethernet is more reliable than USB in that regard and a redundant network over NICs should be done with...

Willkommen im Proxmox-Forum, MetaKnight! Normalerweise können solche Audit-Meldungen ignoriert werden, wenn diese zu keinem Fehlverhalten der Programme führen. Ich vermute, dass wenn innerhalb des Containers der rsyslogd Daemon gestartet wird die /etc/rsyslog.conf Konfigurationsdatei als erstes...

Hi! Could you provide the output of pveversion -v and more information about the container's config? Are there any additional changes or custom configs done on the container that fails to start? What is the output of pct start 800 --debug?

Hi! It is not possible to use any other interface than a network interface for Corosync as its built on top of KNET/UDPU/UDP, which are all network protocols. One possibility is to use USB NICs of course and use this as a separate/redundant NIC for the Corosync setup.

Welcome to the Proxmox forum, andrewgerm! As far as I can see, there is no bug report [0] or item on the roadmap [1] for this specifically. If you want to file a feature request and haven't found any other bug report being similar to your request, you can file one at [2]. [0]...

Hi! What is the output of lsusb on boot and after rebooting the VM? Is the bluetooth adapter passedthrough as a USB device? What is logged in the dmesg when the VM is rebooted?

Did the upgrade also include a proxmox-kernel upgrade? Which kernel version are you running on (you can check with uname -v)? Otherwise, the log seems to indicate that there was some transmission task that did not complete in time. This is usually caused by the on-chip LAN controller offloading...

Could you provide more information what exactly does not work? Are there any errors in the syslog? What does happen if a local and an external IP/domain is pinged?

Hi! Is there certainly no other output than this line? The status code 5 is a completely general error for lvchange and does not indicate anything other than that the command failed. You could try to add a --verbose flag to the command. Else, I'd be curious what the LV lv_data_storage does, as...

Welcome to the Proxmox forum, Walder! As far as I know, there are no global configurations to limit either the physical core affinity and/or number of physical cores usable by an operating system type of VM guests. But one option is that you can set the physical core affinity [0] for each...

Hi! I did not catch this before, but I guess the error Autoinstaller setup error: no such file or directory (os error 2) is because of this part in your answer file: As you haven't prepared the autoinstaller ISO with a first-boot script attached to it. If you don't use this yet, you should...

Welcome to the Proxmox forum! Have you already found a solution to your problem? If not, I suspect that in the process of the firmware upgrade, the boot entries were removed as a side-effect, which is the case for some hardware vendors. Which filesystem do you use? Is Proxmox VE booted with...

Hi! Have you already found a solution to your problem? If not, at first glance it seems like it does not install Proxmox VE at all, but that there's an error displayed. It might be because you need to set a filter to select your NIC or disks, but to verify this, you can boot the automated...

Hi! Have you checked whether there is any error logged in the syslog/dmesg? What is the output of lvs -ao+devices?

Hi! Is this an external storage added manually? If so, then the disk needs to be manually unmounted with umount /dev/sda. But just from my gut feeling, /dev/sda is usually the first disk attached and therefore often the installation medium if there's no other storage interface used (e.g. NVMe)...