Search results

I have a remote file share mounted locally. This is the error when I attempt to add the new datastore in the gui: "EPERM: Operation not permitted". Here are the folder permissions: "drwxrwxrwx 6 root root 4096 Apr 11 18:21 qnap". I am running Backup Server 1.0-1.

I am trying to access my GUI via https://<ip>:8007. Here is what my netstat looks like: How do I configure it to listen on port tcp 8007?

proxmox-ve: 6.3-1 (running kernel: 5.4.78-2-pve) pve-manager: 6.3-3 (running version: 6.3-3/eee5f901) pve-kernel-5.4: 6.3-3 pve-kernel-helper: 6.3-3 pve-kernel-5.3: 6.1-6 pve-kernel-5.4.78-2-pve: 5.4.78-2 pve-kernel-5.4.78-1-pve: 5.4.78-1 pve-kernel-5.3.18-3-pve: 5.3.18-3...

I ran a backup job to my pbs datastore, and received the following: ... INFO: issuing guest-agent 'fs-freeze' command INFO: issuing guest-agent 'fs-thaw' command ERROR: VM 102 qmp command 'backup' failed - backup register image failed: command error: No such file or directory (os error 2) INFO...

I booted it up, and the folder did not have the qnap mounted. I mounted it up, and now it looks like it is working. Strange though, because it was not working before when I had it mounted.

I will contact them and ask them this.

Filesystem Size Used Avail Use% Mounted on 192.168.2.3:/pve-backup 892G 17G 876G 2% /mnt/qnap 192.168.2.3:/pve-backup on /mnt/qnap type nfs4...

any other ideas on this?

I did not. Just to make sure I understand you correctly, here is what I did: Create qnap NFS share. Mounted that shared nfs folder on PBS. Then added that folder as my new "qnap" datastore".

I linked to a nfs share on my network. Doing a df . -h inside of that directory shows the size to be 892G, with 17G used. PBS reports this though: 6.95% (1.62 GiB of 23.25 GiB) What am I missing?

libusb-1.0-0 is already the newest version (2:1.0.23-2build1).

hiddev doesn't seem to exist in the lxc container. From the proxmox-side of things, it should be working then? EDIT: I may have discovered my problem. In the pwrstatd.log file, I see this error message: " The H2C device can't be used, because the linux system does not support libusb or libusb...

This is the program: https://www.cyberpowersystems.com/product/software/power-panel-personal/powerpanel-for-linux/ systemctl start pwrstatd.service then pwrstat -status which shows: "The UPS information shows as following: Current UPS status: State........................ Lost Communication"...

*bump*

I am trying to install OMSA, but am having a difficult time, just with outdated hardware, etc. I found two good threads: https://forum.proxmox.com/threads/how-to-install-dell-openmanage-7-1-in-proxmox-4.26588/ and https://forum.proxmox.com/threads/dell-openmanage-on-proxmox.15380/page-2. I've...

I am trying to pass through a USB-attached device to my server, through proxmox, to a LXC container. Before doing anything, I did a lsusb, and saw the device, but knew that as is, I probably would not be able to interact with it. I found some instructions on how to proceed from here. Here is...

Good to know, thank you. It is a PERC H700. I will look into seeing if it supports that mode, or the alternative.

I am running the latest version of Proxmox on my Dell R710. I have a raid hardware controller inside of it. Right now, I am using raid 1 and have 4 Black 1 TB drives. The first two are used for Proxmox OS and VMs, and the second two are used for storage/backups. I need to increase my drive...

I am running Ubuntu 20. I am running it inside a LXC container. I set a static IP, and do a reboot, and I am back to dhcp again. I look at the file, and all of my changes are lost. I did notice that my interface name changes. The format is: eth0@nnn. I tried for the match section, eth0@*, but...

Great, this worked, thank you! :)