Search results

Supermicro X8DTL-iF Lots of reading re this problem, nothing works (for me) Monitor reports out of range H frequency 81KHz V frequency F4Hz Tried vga=795, got a grub error depricated, use set gfxpayload=1280x1024x24 before linux command that didn't work either!! nor did module_blacklist=radeonfb...

aha .. Proxmox doesn't look in the 'isos' directory - it looks in isos\template\iso so, do I have to have 2 copies of the iso files on Truenas? or can I make Proxmox look in the isos directory

I have a Truenas nfs share, loads of iso files ls /mnt/pve/nfsShares shows all of them Nothing showing in the Gui [Storage 'nfsShares' on node 'pve'] any ideas?

root@pve:~# qemu-img info /mnt/data/images/unifi.img image: /mnt/data/images/unifi.img file format: raw virtual size: 80 GiB (85899345920 bytes) disk size: 80 GiB no info about Bios but looking at Unraid VM, the Bios is OVMF (which is UEFI) so, will try again with UEFI bios settings. thanks for...

Followed several posts on how to .. copied unraid unifi.img file over to proxmox renamed to unifi.raw created a VM in proxmox OS - do not use any media system - default disks - format - raw image format rm /mnt/data/images/102/vm-102-disk-0.raw qm importdisk 102...

Created a cluster on pc1, tried to join from pc2 detected the following error(s): * this host already contains virtual guests TASK ERROR: Check if node may join a cluster failed! there is nothing on pc1 - brand new install and can't delete the cluster from pc1 - can't delete from self - yes...

Proxmox 6.1-3 I have OS (boot ) on ZFS raid 1 then 3 x 1TB HDDs they are not in a pool/raid array I want to swap out one of the storage drives for a 2TB drive (maybe all of them if I can find my drives in the shed!) Do I back up the VMs on the existing drives (I have a NAS mounted as storage for...

I want to scrap my existing setup & restart. So, first - I have 2 x SSD (120GB) drives for boot, good to put into Raid 1? How do I do that? My guess is .. install Debian, create raid using mdadm, install proxmox .. DOH - done on install .. select ZFS RAID 1

Thank you - missed that (doh!)

not working with version 6 proxmox-ve: 6.0-2 (running kernel: 5.0.21-5-pve) pve-manager: 6.0-15 (running version: 6.0-15/52b91481) pve-kernel-helper: 6.0-12 pve-kernel-5.0: 6.0-11 pve-kernel-4.15: 5.4-8

OK thank you

did an update, got a message that I have no idea what it means! rpcbind (1.2.5-0.3+deb10u1) buster; urgency=medium Since version 1.2.5 upstream has turned off the remote calls functionality in order to improve security. This can be turned on at build time. This functionality caused...

doh .. missed update of sources.list ignore me!!!

Attempting to upgrade Proxmox from version 5.4-13 to 6.x only 1 node got to pvecm status error: Corosync config '/etc/pve/corosync.conf' does not exist - is this node part of a cluster? Cannot initialize CMAP service apt dist-upgrade does nothing! What now?

OK - thanks

Attempting to upgrade Proxmox from version 5.4-13 to 6.x only 1 node got to pvecm status error: Corosync config '/etc/pve/corosync.conf' does not exist - is this node part of a cluster? Cannot initialize CMAP service apt dist-upgrade does nothing! What now?

no idea - the second gateway is for the VLAN anyway, left out the default gateway on the 2nd vmbr, seems to work (so far!)

Proxmox Virtual Environment 5.4-11 have exisiting network iface enp6s0 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.1.149 netmask 255.255.255.0 gateway 192.168.1.1 bridge_ports enp6s0 bridge_stp off bridge_fd 0 trying to...

Thanks - read it, but found it VERY difficult reading. A 'simple' example of how to add a disk to an existing set-up would help. I followed a blog post, but apparently it stopped short of explaining the bit I am trying to achieve. Thanks for your interest in my problem.

Could you please give a pointer where to look for this? As far as I know - it is enabled